-If you use a nipper or file when creating a plastic model, it will adhere to tools and parts such as chips and dust, which will interfere with your work and will take time and effort such as wiping with a cleaning tool.
-[The Finger Broom] is a finger attachment with a brush designed at the tip, which immediately cleans the chips and debris adhering to the tools and parts during the production of the plastic model so that the tools and parts are always clean. It is a convenient product that you can work with.
-A total of 4 types of sets are available depending on the size and length of the brush, so you can use it in various situations and methods.
・ S size: Inner diameter about 15mm Length about 22mm
・ L size: Inner diameter about 18mm Length about 28mm
・ S size short x 1
・ S size long x 1
・ L size short x 1
・ L size long × 1
-Easy to put on! Your finger is a brush!
-Select the size of the finger and the length of the brush to be used and attach it to your fingertip to use it immediately.
-There is a brush on the tip of the product, and you can easily clean it while holding tools etc. just by moving your finger. Since it uses a soft silicon material, it can clean debris without scratching tools and parts.
-The product surface is anti-dust processed, so it is hard to absorb dust and dirt. In addition, many ventilation holes are provided to keep your fingers from getting stuffy even for a long time.
-You can clearly check the sharpening condition during sharpening work!
-When you use a file, design knife, router, etc. for shaving, you can remove the scraps and dust adhering to the part side and check the shaving condition clearly while finishing the part to a more ideal shape.
-Because the brush feels like it's on your finger, you can sweep away debris without holding a brush or a cloth, so you can concentrate on your work.
-Also, by gently sweeping the brush, dust and dust scattered in the air is reduced, and air pollution in the workplace can be suppressed.
-Great performance when using nippers!
-When cutting plastic model parts, if chips remain attached to the cutting edge of the nipper, the cutting force will drop and the burrs and gates of the parts may become difficult to see.
-If the nippers get dirty during work, use [The broom] to quickly move your fingers to wipe off the chips. By always using it in a clean state, the load on the nippers is reduced and the parts are clearly visible, so it is less likely to cause unnecessary mistakes.
-Since the size and the brush length are each 2 types (4 pieces in total), you can handle from thumb to ring finger regardless of your dominant hand. Work more efficiently if you use it in your favorite style.
-Since it is made of silicone material, it can be washed repeatedly with water and used repeatedly. In addition, since the blade does not directly hit the attached fingertips, you can work safely.
-There are two colors, blue and black. You can choose your favorite color and use it.
( This is a machine translation. Please allow for possible misinterpretations in the text. )