Searcha and Ramel

Maste Slicer V (Mask)

SAL Small Packet

Product information

Manufacturer:Plamokojo Committee
Group:Masking Tape
Series:Mask
Release Date : Late Apr., 2021
List Price : 1,628yenabout14.88USD
Sales Price : 1,406yenabout12.85USD
Points Acquired : 14pointsOther Currencies
JAN code : 4580474577186
Item code:PMKJ014
Add to Wish List 35 ppl added
Maste Slicer V (Mask)
User Area
PackageMaste Slicer V (Mask) Package1
Other pictureMaste Slicer V (Mask) Other picture1Maste Slicer V (Mask) Other picture2Maste Slicer V (Mask) Other picture3Maste Slicer V (Mask) Other picture4Maste Slicer V (Mask) Other picture5Maste Slicer V (Mask) Other picture6Maste Slicer V (Mask) Other picture7
Item series :

This item is limited to 10 per household.

――Masking is necessary to paint the colors of the assembled plastic model neatly, but it takes a lot of time and effort to cut a large amount of masking tape to fill the gaps between elongated lines, complicated patterns, and curves. It will end up.
--Maste Slicer V is a compact cutter that can make multiple shredded masking tapes at the same time with up to 5 blades by utilizing the replacement blade (6 mm width) of a commercially available design knife.
――By using the attached cutter mat with slider, you can easily and in large quantities cut out the masking tape without getting it dirty.

[Features]
――Make a lot of shredded masts at once according to the place to be pasted!
--By setting a commercially available spare blade for design knives with a blade width of 6 mm (sold separately) at the same time, it is possible to create multiple shredded tapes at once.
――Since the number of blades to be attached can be changed up to 5, it is possible to make tape with a minimum width of 1 mm and a maximum width of 4 mm.
--In addition, if you use two spare blades, you can also cut out curved masking tape and plastic plates. It is also compatible with hologram sheets and colored cutting sheets, so you can enjoy decoration without painting.
* Use masking tape with a width of 10 mm or more.
* The maximum length of each shred is about 8 cm.
* This product only supports masking tape and plastic plates with a thickness of 0.3 mm or less.

--Easy to create fine masking tape!
――If you use the attached cutter mat with slider and cut the shredded tape vertically, you can make a lot of fine masking tape according to your needs at once.
――Since you can make a minimum of 1mmx1mm masking tape, you can perform precise masking such as curve masking gap assistance and digital camouflage.

--A specially set shredded cutter!
――The cutter has a grip that fits in the palm of your hand and can be held stably, making it easier to apply force to the cutting edge.
――The tip has a special shape, and if you put the cutter in close contact with the floor, you can cut the masking tape neatly at the optimum angle. Since the distance between the blades is fixed by the metal blade of the mounting part, the distance between the blades is hard to shake and a certain width can be cut neatly.
――After use, you can close the special protective cap and store it safely.
--A special cutter mat that improves work efficiency! The size is specialized for the area where the masking tape is cut out, so it is compact and does not take up space.
――If you want to make fine masking tape, move the vertical cutting slider horizontally and cut the finely cut masking tape vertically.
――The cut out masking tape can be removed together with the cutter mat, and the next masking work can be started immediately.
--There are a total of 4 places to cut the masking tape, including the top and bottom of the front and back, so if the area to be cut is damaged, you can use it for a long time by turning the cutter mat upside down or turning it over.

[Notes]
――This product does not come with a blade. Please purchase and use a spare blade for design knives sold separately.
――When using this product, please handle the blade with care.
--Use masking tape with a width of 10 mm or more.
――Since the length of the blade varies, select and use a blade with a length as close as possible.
――When not using this product, be sure to cover it and store it.
--Keep it out of the reach of small children.
――Avoid using and storing in a hot and humid environment.
--Product specifications and appearance are subject to change without notice.

[size]
--Dedicated cutter: Approximately 120 x 20 x 15 mm
--Cutter mat with slider: Approximately 112 x 61 x 10 mm
--Cutter mat: Approximately 100 x 50 x 2 mm

[accessories]
--Dedicated cutter x 1
--Cutter mat with slider x 1

( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 14 x 6.8 x 4 cm / 100g
Explanation in Japanese

[ About online shopping pre-order sales ]
Releases of pre-order items can be delayed or moved up. Wholesalers occasionally put restrictions on the number of pre-orders for extremely popular items, in which case we would be unable to deliver the items to every customer. Sales prices and specifications can differ from those initially planned.
For more information,please read "About Pre-order Sale".

Customers who checked Maste Slicer V (Mask) also checked these

Clear File 3way System Gate Finish L type (Hobby Tool)
Infini Model
Other Files
3,300 yen
Pla Nipper (Hobby Tool)
God Hand
Nipper
1,200 yen
HJ Modeler`s Separator Blade (Hobby Tool)
Hobby Japan
Other Files
Wave File S...
570 yen
HG Detail Punch Trapezoid (2) (Hobby Tool)
Wave
Hobby Tool
1,710 yen
Finger Palette (Hobby Tool)
Kotobukiya
Modeling Sup...
551 yen
God Sponge File Special Pack (Hobby Tool)
God Hand
File
1,300 yen
Clear File 3way System Gate Finish S type (Hobby Tool)
Infini Model
Other Files
3,300 yen
Customize Scene Base (City Area Ver.) (Display)
Bandai
1/144
Customize Sc...
900 yen
HG Detail Punch Trapezoid (1) (Hobby Tool)
Wave
Hobby Tool
1,710 yen
Mr. Cleaning Bottle (Air Brush)
GSI Creos
Accessory Pa...
1,900 yen
User Area
Maste Slicer V (Mask)
Customer EvaluationCustomer Evaluation
Click the star!

Customer's comments and images

List of Postings
We have no postings yet.
[ Posting form ]
Image1
Image2
Image3
Nickname
Review
*Please make a post that is relevant to the item.
*Please make sure that the image is in jpg. format with a file size of below 5MB.
*Posts intended for profit and/or advertising are not acceptable. Note also that no reference should be made
  to our competing retailers.
*You do not need to post images and reviews togeter. You can post either one alone.
the terms and conditions of this service.