*Partial correction of specifications has been made by the manufacturer. Please refer to "Other Images 4" for details.
--Made in Japan, made of metal
- Hold parts to help during work
――It also improves the appearance when shooting with a camera!
- Mini vise for models to fix small parts.
- It can be used as a support for crafting and gluing parts, and as a pedestal for camera shooting.
- The notch for fixing extremely small parts can be used to vertically position cylinders and wires with a diameter of 0.6 mm, which is recommended for tip processing.
- The concave portion is for fixing small items with a short side of 17 mm or less, and the flat portion is for fixing small items with a short side of 10 mm or less.
- Luxurious knurled knob design, opening and closing is directly transmitted to your finger.
――What kind of things are they useful for?
- [For holding small parts that are difficult to hold by hand]
- [When you want to process the tip of a thin cylindrical part]
- [Use it when shooting small items to make them look better! ]
- Fixed size (recommended)
・Short side 6.0mm～17mm
・Flat part short side 0.1mm to 10mm
・ - Notch Cylinder (diameter 0.6mm to 2.5mm) * You can fix a thin wire perpendicular to the vise.
*There is a possibility that it will fall over if it is pinched by a heavy object, an object with an unstable weight balance, or an object with a height of 10 cm or more. Please be careful.
*Because it is a machined product that emphasizes accuracy, there are processing marks, stains, and scratches on the surface. Please note.
- Size (including protrusions) W20mm D45mm H20mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )