Product Description
――Easy to clean the gate cut of etched parts!
――The gate cut does not bend and you can cut it cleanly without getting close to it!
--Ideal for work with an appropriate size of aluminum body and stable weight.
――If you fit the groove with a width of O.6 mm and a depth of 0.5 mm, you can make a clean gate cut without bending even in the R part and straight part.
――You can cut out with a cutter, a design knife, or a knife you often use!
――Large parts, small parts, and easy-to-bend mesh parts can be cut cleanly without bending, and the cut end is also beautiful.
-It also has an elliptical groove, and it is devised so that parts with various R can be cut out neatly.
[spec]
--Body material: Aluminum 52S (JIS H4000 A5052P hot rolled finish)
--Processing: NC Machining Center Precision Machining [Groove Width: 0.6mm / Groove Depth: 0.5mm]
--Plate thickness: 5mm Φ3mm with screw holes
--Vertical and horizontal size: W80mm x D40mm x H5mm
--There is a Φ3mm screw hole on the back side.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 22 x 5 x 1 cm / 51g
Product Specifications
- Item code
- AL-K157
- JAN code
- 4562256112525
Purchase Information
This item is limited to 10 per household.