Product Description

――Make and know the unique stealth ship and its unusual shape !!

[About the actual ship]
--The US Navy's Zumwalt missile destroyer DDG-1000 was commissioned in 2016 and attracted attention.
――The hull design, which demonstrates a high degree of stealth, is characterized by the widest draft part and the peculiar shape of the freeboard that slopes inward.
――The superstructure in the center of the deck also hides protrusions such as the antenna and ramp, and is composed of a flat surface, which makes the unique style stand out.
--The total length is 183m and the displacement is 15746 tons. The engine is equipped with two Rolls-Royce gas turbines.
--Maximum speed of 30 knots.
--Weapons are equipped with new era weapons such as Mk.57 VSL (20 cell) missile module.
--In addition, it has a helicopter hangar and a landing deck at the rear of the hull, and can carry MH-60 Sea Hawk helicopters.
--In 2019, the second Zumwalt-class ship, Michael Monsoor DDG-1001, will also be commissioned.
--In addition, the third ship, Lindon B. Johnson DDG1002, is scheduled to be commissioned in 2020.
――It is attracting attention as a new era missile destroyer.

[About the model]
-The model is 1/700 scale, finished with a total length of about 26 cm, and realistically reproduces the unique style of the state-of-the-art missile destroyer Zumwalt class.
--For this kit, choose one of the first ship [Zumwalt (DDG-1000)], the second ship [Michael Monsoor (DDG-1001)], and the third ship [Lyndon B. Johnson (DDG1002)]. Can be assembled with.
-The model is a full hull model that is also reproduced below the draft line.
――The bottom of the ship accurately reproduces the shape of the uniquely shaped bow as a separate part.
――In addition, the freeboard to the superstructure is also divided into left and right parts, and the unique design that sets it apart from the futuristic ships will be shown in three dimensions.
-The walls and deck of the superstructure are reproduced with subtle details such as sculptures, and in this kit, 3D printed parts are prepared to reproduce the top part of the main bridge structure to express the details.
--The Mk.46 Mod 230mm cannon and mount placed on the rear deck of the bridge are also available in 3D printed parts.
――The difference between the 1st ship, the 2nd ship, and the 3rd ship is reproduced firmly.
-You can not miss the appearance of the ship of the near future from the deformed destroyer reproduced on 1/700.

[Major features]
--Reproduce the Zumwalt class, a new stealth destroyer on 1/700 scale
--A 3in1 kit that can be manufactured by choosing either the 1st ship Zumwalt, the 2nd ship Michael Monsoor, or the 3rd ship Lindon B. Johnson.
--The upper details of the main superstructure, the upgraded radar, the two Mk46 Mod 230mm guns, etc. are precisely reproduced using new 3D printed parts.
――3D printed parts are set for the 1st ship and for the 2nd and 3rd ships, and the difference is clearly expressed
--Reproduce the characteristic shape realistically by using a lot of slide molds
--Completion size: Total length about 260mm


Item Size/Weight : 33 x 19 x 4.5 cm / 245g

Product Specifications

Country

USA

Item code

DR7148

JAN code

0089195871480

Purchase Information