-Represents drums abandoned in water areas such as rivers and swamps.
――The kit is cut at the water line so that it can be installed on the surface of the water.
--Please use for diorama and vignette.
[how to use]
(1) Preparation
--Use a remover or lacquer solvent to remove the mold release agent on the surface, and the sprue side will be the ground plane, so use water resistant paper to scrape it until it is flat.
--Bubble may be generated during the duplication process, but fill the holes on the surface with epoxy putty, spray a surfacer before painting, and repair small scratches on the surface.
(2) Painting: Basic painting uses lacquer or acrylic paint.
--For weathering, use oil or enamel paint to express a worn-out texture such as rust, scratches, and paint peeling.
――It is recommended to spray a lacquer-based matte clear on the finish to protect the surface.
(3) Example: Place it on a painted base and fix it with instant adhesive.
--For water, pour in a colored transparent epoxy resin * and add a wave pattern, aquatic plants, etc. before curing.
(* Acrylic medium and lacquer clear can be used as a substitute)
( This is a machine translation. Please allow for possible misinterpretations in the text. )