* This item cannot be canceled.
-It is [LB-ER34 Super Silhouette Skyline Tokyo Auto Salon 2020] manufactured as a 1/18 scale handmade model car of [EIDOLON].
――This model is a faithful reproduction of the [LB-ER34 Super Silhouette Skyline], which is based on the ER34 Skyline and wears an aero homage to the silhouette formula of the past.
[Vehicle commentary]
――The Liberty Walk based in Nagoya is a customized brand that is attracting attention not only in Japan but all over the world by incorporating the `works style` represented by Kenmeri and Hakosuka into modern sports cars and supercars!
――The race category `Super Silhouette Race`, which was popular in the early 80's, retains the style of a commercial car in appearance, but it was a hot race where monster machines equipped with overhanging chin spoilers and over fenders competed.
――In particular, the DR30 Skyline RS Turbo Super Silhouette was extremely popular.
――At Liberty Walk, aero development was carried out with the concept of making such a super silhouette machine in the modern skyline.
――The protruding chin spoiler reminiscent of a silhouette formula and the large overhanging over fender have been finished as if they were tracing the racing car of the time.
--The rear wing has the same design as the `R35 GT-R Silhouette Works` on both sides.
――The interior is inspired by a racing car, the interior has been peeled off, and roll cages and bucket seats have been added.
[Model explanation]
――Even if the modified part is the first thing you see, such as a custom car of Liberty Walk, we do not deform it, build a normal body prototype of the base vehicle, and then 3D scan the custom part of the actual car. The method of drawing the data of is adopted.
――This ER34 also manufactures the prototype by the same method.
――Recently, not only the exterior but also the interior is scanned from the actual vehicle to produce prototype data, but the merit is also utilized in the expression of the complicated `Dongara interior` with the trim and seat of the interior removed.
――It is also important to check the sharpness of the mold for small parts such as the yellow roll bar, BRIDE bucket seats, and LB performance steering.
――For wings that are prone to distortion due to aging, resin is used for the columns, but white metal is used for the main flap, and etched parts are used for the wing tip and center stay.
――Although it is a point that I was particular about the powerful stance that crawls on the ground, in order to set the vehicle height low and the tires and wheels to hit or not hit the fender, the wall thickness inside the fender house should be set. It is necessary to make it as thin as possible.
――However, the thinner the wall thickness, the less rigid the resin will be, and the more difficult it will be to dent, distort, or even chip, but be careful. , It takes more time to mold than the normal model.
--Leather base and clear cover included
--Material: Resin body, white metal parts, etched parts, aluminum sawn parts
( This is a machine translation. Please allow for possible misinterpretations in the text. )