Product Description
- The product is a kit format that requires assembly. It is 1/12 scale.
- No painting required: Each part is colored with a molding color, and the body achieves a glossy texture that cannot be obtained by painting.
- No Gluing Required: Designed to fit parts together for easy assembly.
-The product is based on the current Super Cub C110, which was launched in 2018.
- It is possible to select/manufacture two types of brake lamps, the initial type and the brake lamps that comply with the revision of regulations in May 2020.
- Accurately reproduces the many moving parts unique to 1/12 scale and the fine modeling.
- The body has a 2-piece structure that is left and right aligned.
- The leg shield is integrally molded and designed to be easily press-fitted to the body.
- The front fender is integrated with parts while accurately reproducing the molding with a slide mold.
- The side cover is a separate part from the body, and the complex shape composed of curves and straight lines is accurately three-dimensionalized.
- The handle is shaped to be sandwiched between the body, and the left and right grip switches are also well-sculpted.
- The meter panel is represented by the attached sticker, and the panel cover is fitted with clear parts for a realistic finish.
- In order to create the atmosphere of a real car as much as possible, the mirror is designed with an ultra-fine injection.
-Reproduced with different parts and accurate shape of the brake lever, which is a different color from the handle.
- Headlight lenses are made of clear parts, and the inner shape is also expressed with delicate sculptures.
-The engine is divided into 3 parts, left, right and front, to express the external shape three-dimensionally.
- The change pedal is a one-piece part that accurately reproduces the bar cross section and pedal shape.
-The muffler has a 3-piece structure that reproduces both the exhaust port and the conical shape.
- The hook inside the leg shield, which is also a feature of the Super Cub, can be easily expressed with a seal or with an adhesive bonus part.
- The stand is a separate part and is movable. It is also possible to park the bicycle.
- The side stand is movable after being made into a separate part. It is possible to tilt the body and put it in a parking state.
- The seat is a two-piece structure that is divided in the same part as the color tone, and it is a movable type that can be flipped up.
-Reproduces the fuel filler port flat when the seat is in the open state.
- The name decals on both sides of the fuel tank are metal wheel seals.
- The rear carrier uses a slide mold and is an integral part.
- Brake lights can be selected from two types: a horizontal type after the 2020 revision of the law, and a vertical type from the time of release.
- The rear seat of the actual car optional parts is recorded as a bonus part. You can choose to wear it.
-The hub in the center of the wheel is a one-piece part that reproduces the surrounding shape with a slide mold.
- Tires are made of rubber material, specially used for this product.
- Accurately reproduce the width difference between the front and back.
-Completed size is (approx.) Length 155x Width 58x Height 87mm.
- 111 assembly parts
[Attached contents]
- Runner X18
- Rubber material tire X4
- Assembly instructions x1
- Seal X1
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 32.2 x 20.5 x 6.3 cm / 312g
Product Specifications
- Motor bike manufacturer
- Honda
- Item code
- 142005
- JAN code
- 4968728142005
Purchase Information
This item is limited to 3 per household.