- A tool for easily digging a 45 degree chamfered round mold.
[Product Details]
- Size (hole bottom diameter): 1.0, 1.5, 2.0, 2.5, 3.0mm
- Quantity: 5 pieces (1 piece for each size)
- Shaft thickness: Φ3mm
- Material: Special cutlery steel
- Made in Japan
*Specifications are subject to change without notice.
[Notes]
- Please use it after firmly fixing it to the pin vise.
- Please wear finger cots and gloves for your safety.
- Although it is manufactured using high-hardness metal, applying excessive force or using it in a prying manner may damage the blade and cause an unexpected injury.
- Try to keep the blade perpendicular to the surface you want to dig. If the blade is set diagonally, the center guide may break due to excessive load.
- Make sure there are no people around before starting work as the cutting object may fly out.
- It is very dangerous if cutting objects or broken blades get into your eyes and you may lose your eyesight. Please wear safety glasses for your safety.
- Please be careful not to injure yourself as the blade is sharp.
- Do not touch the cutting edge directly as it is dangerous.
- Do not apply more load than your capacity.
- After use, wipe with a clean cloth, apply anti-rust oil, and store in a case.
- Store in a case out of reach of small children.
- Be careful not to injure yourself when opening the lid of the case or removing the blade during use.
- Unlike a spin blade (no center guide), it cannot be used as a chisel.
- Due to its special shape, it cannot be re-polished in a spin blade polishing holder.
- There is a center guide so there is a small hole in the center.
( This is a machine translation. Please allow for possible misinterpretations in the text. )