- Total length about 50cm, tough 4WD RC model with a unique body!
- A 1/10 scale electric RC car model of a powerful cross country machine.
- Total length is 53.7cm, width is 24.1cm, height is 24.7cm, wheelbase is 34cm.
- An electric RC running mechanism is packed into a size full of presence.
- The mechanism that enables tough driving is a full-time 4WD shaft drive.
- In addition, a special chassis with a metal frame and large-diameter tires with a block pattern tread pattern that grips the road surface firmly with a diameter of 12 cm and a boldly lifted 4-link suspension is adopted.
- In addition, the motor is equipped with a powerful 35T550 type motor.
- Combined with a suspension with a wide range of motion, it is a great attraction to demonstrate high running performance.
- The full-fledged mechanism has been assembled.
-The machine is fully assembled, from the shaft drive four-wheel drive mechanism to the front and rear suspensions.
- A 2.4GHz RC mechanism is already built in, and of course a transmitter is also available.
- Batteries are sold separately, 4 AA batteries are used for the transmitter, and a 20C (7.4V), 136 x 22 x 55mm size LiPO battery is used for the running battery.
- Just put in the battery and turn on the switch to enjoy driving.
- Of course, you can run forward, backward, left and right by operating the transmitter at hand.
- In addition, the powerful body with the original design of the front bonnet type track head in the rounded cabin is pre-painted.
- Available in 3 colors: bright yellow, bright red, and refreshing blue.
- It is a style that conveys the momentum of a trialer who boldly challenges a road without a path.
- In addition, the Japanese manual will be posted on the site, so you can enjoy driving with confidence.
- 1/10 scale complete model, one that you can enjoy dynamic and powerful driving.
[Major features]
- RC model finished product at 1/10 scale
- Can be steered forward, backward, left and right with battery and motor
- Demonstrates high driving performance with four-wheel drive
- With 2.4GHz transceiver
- 35T550 type motor
- The drive system is also equipped with ball bearings
- Japanese manual is posted on the site
* Transmitter batteries sold separately: Uses 4 AA batteries
*Battery and charger for running are sold separately: 2-3S LiPO battery and dedicated charger
*Please use the size of the battery body within 00 x 00 x 00 mm.
( This is a machine translation. Please allow for possible misinterpretations in the text. )