Product Description
- A small but big role! We will release camera parts on the side of the car body (for intermediate to advanced users)
- Have you noticed the cameras on the sides of train cars that are increasing in number these days?
- Vehicles used for one-man driving have been modified so that the driver installs a camera at the end of the vehicle for safety confirmation (the new model has been installed from the beginning), and this movement is now being used by both JR and private railways. is spreading.
- In JR East, in addition to being seen in the E531 series (5-car accessory train) on the Joban Line, the E233 series (4 cars for the Ome/Itsukaichi Line) on the Chuo Line, the E231 series on the Hachiko Line and Kawagoe Line, and the 227 series on JR West * can now be seen.
- Although it is a very small part for N gauge vehicles, it is an important appearance point that supports safe driving.
- This time, we will create this part exclusively for you, so that you can reproduce the latest appearance.
*Please note that in the case of the 227 series, the mounting point on the actual car is related to the logo on the side of the car body.
- Since it is a work to attach very small parts with adhesive, it will be for intermediate to advanced users.
[How to install]
- Separate the handle with the camera part from the runner
・It can be detached by simply folding the handle part from the runner.
- Apply glue to the back of the camera part
・Apply a small amount of adhesive using the tip of a toothpick, etc.
・We recommend a transparent rubber-based adhesive or <#24-033 Glue & Glaze>, which can be post-treated even if the adhesive protrudes out before it dries.
-Determine the mounting position, press the camera part against the body and tear off the handle
・When removing the handle from the main body of the camera part, please work carefully while holding the camera part with your fingertips so that it does not move as much as possible.
- Use a toothpick to remove excess adhesive from around the camera parts, then dry to complete
・For storage after installation, please be careful not to lose parts due to contact.
- There are 4 mounting positions per car, one at each end of each car. Please refer to the site or magazine that has posted the actual car and install it.
- The recommended adhesive, Glue & Glaze (Part No. 24-033), is very convenient for mounting this part because it dries quickly and becomes transparent when dry.
- If you haven't tried it yet, please take advantage of this opportunity.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 15.1 x 6.1 x 0.4 cm / 5g
Product Specifications
- Item code
- 28-228
- JAN code
- 4952844162689
Purchase Information
This item is limited to 3 per household.