- Etching parts that are indispensable for ship modelers are now available!
[Contents]
- Window frame (space 0.8mm x height 1.0mm)
- Window frame (space 0.9mm x height 1.0mm)
- Window frame (space 1.0mm x height 1.0mm)
- Window frame (space 0.8mm x height 0.7mm)
- Window frame (space 0.9mm x height 0.7mm)
- Window frame (space 1.0mm x height 0.7mm)
- Handrail (for stun walk)
- This product is a general-purpose photo-etched part intended to be used for miniaturizing the bridge part of the Japanese Navy's 1/700 ship plastic model.
- We have prepared as many parts as possible so that you can practice and improve your skills even if you are prepared to fail.
- The most frequently used window frames with a height of 1mm are mainly provided.
- Apply the window frame of this product to the bridge of the temporarily assembled commercially available plastic model, and adjust the plastic model side so that the height matches.
- The 0.7mm high window frame was intended for the low profile found on the front of some heavy cruisers.
- 3 types of 0.8mm, 0.9mm and 1.0mm are available for the width of the window frame.
- It is common for bridges with angular planes to have vertical window frames on the corners.
- You can eliminate the discomfort by selecting parts that match the front, diagonal front, and sides of the bridge as much as possible and attaching them individually.
- The handrail for Stan Walk is a bonus part that reproduces what was seen on large warships from the Meiji period to the Taisho period. Please feel free to use it according to your purpose.
- Please use instant adhesives, epoxy adhesives, etc. for adhesion.
( This is a machine translation. Please allow for possible misinterpretations in the text. )