1/80(HO) Railyard Training Bathroom (Unassembled Kit) (Model Train) - HobbySearch Model Train HO/Z Store

This item is limited to 12 per household.

[ Recommended Tools (Example) ]
- Tamiya Craft Bond / Roket Card Glue
- Craft Knife / OLFA Cutter
- Twofold Cutter Mat A3 (Navy) / Twofold Cutter Mat A3 (Brown)
- Straight Tweezers / Angled Tweezers

[ Related Products ]
- 1/80(HO) Endo Clear Glass (Cabroid(R)) (1sheet)

[ Engine Depot Series Related Products ]
- 1/80(HO) Railroad Office A (Unassembled Kit)
- 1/80(HO) Railroad Office B (Unassembled Kit)
- 1/80(HO) Small Warehouse (Unassembled Kit)
- 1/80(HO) Railyard Training Office A (Unassembled Kit)
- 1/80(HO) Railyard Training Office B (Unassembled Kit)
- 1/80(HO) 2 Stories Railroad Office A (Unassembled Kit)
- 1/80(HO) 2 Stories Railroad Office B (Unassembled Kit)
- 1/80(HO) Railyard Training Toilet (Unassembled Kit)

- We will release two types of paper kits for 1/80 No. 16.
- This kit requires painting.
- This is an all-paper kit that laser-engraves the outer wall clapboard.
- The roof can be removed after assembly. Additional processing is easy.

[feature]
- Jigs are included for parts that tend to slip when gluing, such as window frames. It can be glued accurately.
- Engraved exterior walls. Reduce the number of parts and reproduce the fine appearance.
- Aiming for an [easy kit] that is easy to assemble despite its delicate appearance.
- Dimensions about 129 x 83 x 65mm high

[Items required for assembly]
- In addition to the items required to assemble a general paper kit, it is useful to have the following items.
・Oil-based, quick-drying ・Acrylic lacquer spray: For filling carved outer walls (high water absorption and low strength)
・Spray glue: This makes it easier to bond the window frame (door frame) and the roof tile.
・Plastic van for glass expression
・Painting supplies

Item Size/Weight : 29.8 x 22.7 x 0.3 cm / 134g