Product Description

-- A comprehensive version of the EF81 multiple-unit locomotive! The 400 series makes its first appearance in 1/80 scale!

- Of the EF81 series, the 400 series was modified from the 0 series to replace the EF30 series used in the Kanmon Tunnel, and is characterized by the addition of a multiple-unit central control system.
- Currently, along with the 303, 450 and 500 series, it is used to pull freight trains within Kyushu.

[Actual vehicle guide]
- The EF81-300 series, four of which were introduced as locomotives for the Kanmon Tunnel, are characterized by their stainless steel bodies as a measure against salt damage in the Kanmon Tunnel, and the No. 303 locomotive is still in service within Kyushu to this day, remaining unpainted.
- Of the EF81 series, the 400 series was modified from the 0 series to replace the EF30 series used in the Kanmon Tunnel, and multiple-unit overall control was added.
- Currently, along with the 303, 450 and 500 series, it is used to pull freight trains within Kyushu.
- In the future, they are scheduled to be replaced by additional EF510-300 series locomotives.

[point]
- Reproduces the appearance of the inspection cover installed under the driver's cab window

[Product Features]
- H-rubber is reproduced in black
- Rooftop equipment is reproduced in gray
- Integrated plate wheel
- Headlights are lit by warm white LEDs and have an ON-OFF switch
- The power terminal is installed inside the roof monitor.
- Insulator parts are reproduced in green
- JR mark and vehicle markings are printed
- Etching plate for maker's plate and end marking included
- Minimum radius of R600 can be passed (excluding S-shaped lines)

[About <HO-2526>]
- Prestige model with parts installed
- Reproduces the 400 series with an inspection cover installed under the driver's cab side window
- The white line on the bottom of the side has been restored through renovation work.
- The roof under the pantograph is reproduced in gray.
- Skirt with additional jumper plugs
- Vehicle number can be selected and etched number plate included
- [EF81-403・404・406・408]
- The district nameplate is printed with [Gate]
- The following parts will be pre-installed in metal
·pantograph
・Various handrails
Wipers
・Signal flare
・Air hose
- The following parts will come with plastic parts already installed.
・Cart step
・Radio antenna
·whistle
Release lever

[Features]
- Newly produced model with inspection cover installed under the driver's cab window
- The white line on the bottom of the side has been restored through renovation work.
- Rooftop equipment is reproduced in gray
- The roof under the pantograph is reproduced in gray.
- The district nameplate is printed with [Gate]
- H-rubber is reproduced in black
- Skirt with additional jumper plugs
- Integrated plate wheel
- Headlights are lit by warm white LEDs and have an ON-OFF switch
- The power terminal is installed inside the roof monitor.
- Insulator parts are reproduced in green
- Vehicle number can be selected and etched number plate included
[EF81-403, 404, 406, 408]
- JR mark and vehicle markings are printed
- Prestige model with parts installed
- <The following parts will be made of metal and installed>
・Pantographs ・Various handrails ・Windshield wipers ・Signal flares ・Air hoses
- <The following parts will have plastic parts already installed>
・Truck step ・Train radio antenna ・Whistle ・Release lever

[Set contents]
- EF81-400 (JR Freight renewal car, prestige model)

[accessories]
- Runner parts (etching): Number plate
- Runner parts (etching): maker's plate, end markings

[Special Notes]
※＜HO-131＞,＜HO-132＞, and＜HO-185＞ will be discontinued.

- JR Freight approved


Item Size/Weight : 32 x 12.6 x 7 cm / 816g

Product Specifications

Item series

Electric Locomotive

Organization

Japan Freight Railway (JR Freight, JRF)

Region

Kyushu

Item code

HO-2526

JAN code

4543736525264

Purchase Information