Product Description
──A must-have item for magnet removal work that can be used as a magnet receptacle just by pasting it on.
- Magnet Setter 2 is a magnetic sticker that can be used as a holder for neodymium magnets.
- It is a soft material that fits curved surfaces and is thin at approximately 0.2mm, so you can create magnet receivers even in small parts where it is difficult to embed magnets.
*Notes on circular cut type
- Due to the punching process, it is slightly arched.
- When pasting, please press well so that the center sticks together.
- Press with a round part such as the back end of a ballpoint pen to ensure a good seal.
※Note
- If you use model enamel paint for staining with a solvent, the adhesive strength may decrease. Avoid prolonged soaking in solvents.
- If the adhesive strength is insufficient, reinforce it with instant adhesive or epoxy clear adhesive.
- Since it is cut from metal, please be careful not to injure your fingers or other objects on the edges.
- Sheet size: Width 49mm Depth 40mm Thickness 0.2mm
- Seal size: 1 piece diameter 2.9mm thickness 0.2mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 8.9 x 6.1 x 0.1 cm / 3g
Product Specifications
- Item code
- MGST-C50
- JAN code
- 4573211377811
Purchase Information
This item is limited to 10 per household.