Magnet Setter 2 Free-form CuttingSheet (1 Sheet) (Material) Reservation - HobbySearch Hobby Tool Store

This item is limited to 10 per household.

[ Related Products ]
- Magnet Setter 2 3.0mm (1 Sheet)
- Magnet Setter 2 5.0mm (1 Sheet)

──Just stick it on to become a magnet holder, a must-have item for attaching and removing magnets

- Magnet Setter 2 is a magnetic seal that can be used to receive neodymium magnets.
- It is a soft material that fits curved surfaces and is thin at approximately 0.2mm, so you can create magnet receivers even in small parts where it is difficult to embed magnets.

*Notes on circular cut type
- Due to the punching process, it is slightly curved in an arch shape.
- When applying, press firmly to ensure the center is firmly attached.
- It will adhere better if you press it with a round part such as the back end of a ballpoint pen.

※Note
- If you use model enamel paints and inking with a solvent, the adhesive strength may decrease. Do not soak the paint in a solvent for a long time.
- If the adhesive strength is insufficient, reinforce it with instant adhesive or epoxy clear adhesive.
- Since this is cut metal, please be careful not to injure your fingers or other parts of your body on the edges.

- Sheet size: Width 49mm Depth 40mm Thickness 0.2mm