Product Description

[[Product Introduction]
- Inking is an essential process for giving plastic models a three-dimensional finish.
- However, it can be difficult to find an inking pen in the perfect color to match the color of your plastic model.
- [My Inking Pen] is an innovative pour-in type inking pen that allows you to fill the pen with paint of your choice to match the color of the plastic model kit you are making, allowing you to perform professional inking with the feel of a paint brush and the ease of use of a marker pen.
- Made from a material that is resistant to enamel solvents, you can create an enamel paint inking pen that is easy to wipe off and redo.
- You can also use it with pour-in adhesive.

[Make your own inking pen with your favorite color]
- [My Inking Pen] is a pen that allows you to ink in the color you want to achieve your preferred finish.
- When using, first dilute (5 times) the paint and solvent (ink) according to the marks on the dedicated measuring cup to create the ink.
- Pour the ink you've created into the back of the pen, turn the knob on the side of the pen, and when the tip is completely saturated with the ink color, the setup is complete.
- Once you set the color, you can apply shading to approximately 2-3 plastic model kits.
- The product comes in a pack of 3 and is available in multiple colors for versatile use.

*The ease with which the ink flows will vary depending on the color used and the temperature.
*Based on the dilution level in the dedicated measuring cup, add solvent as necessary to adjust the concentration to a flowable level.
*There is a risk of paint leaking from the inlet lid at the rear of the pen. Please make sure to tighten it securely before use.

[Professional inking using capillary action]
- When you hold the tip of the brush against the mold of the plastic model you want to inscribe, the ink will flow and the inking process will begin.
- The ink flows naturally into the grooves of the panel lines by capillary action, just like when using a paint brush to ink, resulting in an ideal finish.
- The pen has a very fine tip, so it can easily be applied to tight or narrow areas.
- The flow rate varies depending on the type of ink and its dilution, so adjust the knob at an angle as you use it.
- The material used is resistant to water-based and lacquer solvents as well as enamel solvents, making it possible to create an enamel paint inking pen that is easy to wipe off and redo.

*You can refill colors that have already been used, but you cannot use different colors with the same pen.

[Built-in mixing ball to aid in mixing of paint]
- Since ingredients may separate after a certain period of storage, a metal stirring ball is included as standard.
- By shaking the pen up and down, you can ensure that the paint is evenly mixed and released back into the pen.
- If you forget to do something or need to ink a second time, just shake the pen to mix it up and open the knob to use it again. When the ink runs out, you can refill it with the same color of ink and use it again.

*If the main unit is stored for a long time, the paint may stick to the main unit and become difficult to stir. Please use it regularly as much as possible.
*When shaking the pen, make sure the knob and lid are closed before shaking it. Otherwise, paint may splash out from the tip of the pen.

[Easy to store and clean up]
- By turning the knob on the side, you can stop the ink from leaking out, allowing you to store the pen while reducing the ink's evaporation.
- The pen tip is made of a highly resilient material, so even if paint hardens with the tip still on it, it is unlikely to crack or become frayed. It can also be easily restored to its original shape by dissolving it in a parts cleaning solvent.
- If stored for a long time, the tip will harden, so you will need to dissolve it in a solvent before using it.

*When storing, store the pen upright with the tip facing down. Any paint remaining on the tip may drip off and stain the handle.
*Be sure to wipe off any remaining paint from the tip of the pen before tightening the cap.

[Compatible with pour-in adhesives]
- This product can also be used as an adhesive pouring pen.
- By transferring the remaining pour-in adhesive with the eyedropper into the My Inking Pen, you can use up every last drop, making the gluing process smarter and more efficient.

*Since pour-in adhesive has a very low viscosity, it may flow out of the pen tip with force. You will need to tighten the knob on the side to reduce the flow rate.

[Product Specifications]
- My inking pen body x 3
- 1x measuring cup

[Product size]
- Main unit: approx. H160 x W15mm (built-in stirring ball: approx. φ5.5mm)
- Dedicated measuring cup: Approx. H26*W23mm


Item Size/Weight : 20.6 x 9.6 x 2.6 cm / 54g

Product Specifications

Item code

PMKJ028

JAN code

4580474577865

Purchase Information