Product Description

--An even sharper cutting edge.

- A new sustainer blade [Sustainer Blade SHARP#] with enhanced durability and sharpness exclusively for the [Sustainer Nipper Advance].
- The material used for the conventional blade has been changed, resulting in a blade that is less likely to chip or break.
- Furthermore, by reviewing the polishing method, the cutting edge has become even sharper and there is less whitening on the cut surface.

[Improved precision and durability]
- The material has been changed from the tungsten carbide steel used in the [Sustainer Blade Set] to Swiss-made high-speed steel.
- This makes the ultra-thin cutting edge less prone to chipping, resulting in a blade that lasts longer.
- In addition, by slightly increasing the thickness of the blade and controlling it with high precision, the difference in height between the blade and the cutting board blade of the Sustainer Nipper ADVANCE is reduced, reducing the amount of uncut gates.
*Due to the structure, there may be a small amount of uncut material depending on the gate position and cutting method.
*Due to the use of new materials, regular maintenance is recommended.

[Improved sharpness with less resistance]
- The Sustainer Blade SHARP# has an improved sharpening method for the blade, resulting in a sharper cutting edge.
- The incline is shallower than the previous Sustainer Blade, and by sharpening the blade in two stages, the blade cuts as if it were cutting a soft material, and the cut surface is also smooth.

[Even hard clear parts can be cut easily]
- Even highly transparent and hard clear parts can be cut neatly with minimal whitening or cracking.
- Although it is replaceable, it has the advantage of retaining its sharpness for a long time even when repeatedly cutting hard parts with a single blade.
*Do not cut anything thicker than the φ3mm runner of a plastic model or supports for 3D printed parts, as this may damage the main body of the Sustainer Nippers ADVANCE.

- Set contents
・Sustainer Blade SHARP# x 3
・3 spare screws
・Special case x 1

- Product size
・Main body: Approx. W20 x H11 x D1mm
・Special case: Approx. W35 x H63 x D7mm

- Material
・Sustainer blade: High speed steel
・Special case: Polypropylene


Item Size/Weight : 12.2 x 7.2 x 1.2 cm / 15g

Product Specifications

Item code

PMKJ026S

JAN code

4580474577810

Purchase Information