Product Description

GSW UV Putty is a one-component putty designed specifically for finishing small irregularities and filling gaps on a variety of surfaces including metal, resin and plastic.

Packaged in a light-resistant aluminum container to protect from fluorescent lighting and direct sunlight.
As it is a single-ingredient material, it can be used straight from the container, saving time and effort compared to mixing multiple ingredients.
This allows for efficient application by allowing multiple thin layers to be applied in succession without waiting for each layer to fully cure.
Cure time will vary depending on distance from UV light source and thickness of each layer. Using UV light will allow for quicker curing.
Once cured, it can be sanded and painted. (GSW UV light has a wavelength of 385-400nm.)

Before use, clean the surface to remove any dust or dirt.
Apply putty with a spatula, paint brush, sculpting tool, or silicone brush.
Any excess can be removed with a cotton swab soaked in alcohol.
Cure under UV light at a distance of 1cm for about 15 seconds, or expose to direct sunlight.
Once cured, it can be sanded and drilled as needed.

Color: translucent
Storage: Store between 7°C and 25°C.
Expiration date: 12 months when stored in a cool, dark place
Be careful not to expose to direct sunlight during use, and close the lid immediately after taking out the required amount.

Contents: 50ml

Product Specifications

Item series

Putty

Item code

GSWD-4388

JAN code

8435646517483

Purchase Information