- A new Tomix rail to rail compared to conventional products, and ease of handling and dense of the appearance
Is [Fine Track. Standard rail, lineup inherits those of rail conventional products,
I realized fully compatible.
NOTE - Fine track handling
1, please go to the putting on and taking off of the horizontal rail. Please be careful not to twist. In unreasonable angle
If you repeat the plug and pull out, you would damage the rail end and Joyner.
2, please verify that the rails are connected securely before driving. If the rail is connected
And there are steps in between, the vehicle is not only to digress, and you will quickly damage the rail.
3, if you want to power the rail electricity from the power unit, using the DC feeder N dedicated
Please.
In order to maintain good power function of the rail, frequently optional 4, <6401> rail rail of all
After polish it with cleaner, then wipe. Please note that do not wear and oil in particular.
5, because it is made of ABS ballast is (base part), where the (direct sunlight, heating appliances a hot place
Please do not leave, etc.) near. There is a possibility of deformation. In addition, the chemicals such as thinner
Please note as well.
※ There is paint on the way with a rose color of the rail track bed. Please note.
- About Joiner
1, to connect the rails, is adjusted to (or slightly upward acceleration) oriented horizontally Joiner
Please.
2, If Joyner is out, please attach a note the orientation of the Joyner. A sharp part
Please note that no personal injury on such.
※ Please do not use any (sold separately) <6005> Joyner repair. I damage the part Joyner
It may cause.
( This is a machine translation. Please allow for possible misinterpretations in the text. )