Product Description

[Abstract]
- This instrument, Z to G gauge control system operation is available for a wide range of automatic gauge Orikaeshi.
- On the shelf, in a small space to make Yukari Hitoshi layout window, you can make a realistic vehicle driving.

[Features]
- The power pack with no power. Just run the instrument.
- Can be used anywhere in the rail manufacturers.
- Can travel at slow speed to stop driving and to reach a constant speed,
Deceleration rate can be adjusted in three stages added.
- You can freely set from 1 minute 30 seconds to five seconds of stoppage time at both ends independently.
- Speed control PWM control (pulse control), it has adopted a very slow
Capable of continuous operation on the ramp while driving at slow brightly lit.
- Speed can be set free.
- Two places isolated rail gap (gap strip) is provided, between the rail and the instrument
Only four lines connect.

How to Wire]
- See description 1 image

[Specifications]
- Model:
CS-021A
- Vehicle fit:
2 12V DC vehicle wire
- Adjust Speed:
Controlled continuously variable PWM control pulse
- Additional deceleration adjustment:
[Late] [speed] [Off] the three-stage switchable
- The timing stop:
Two independent front and rear
Every 05 seconds - 1 minute 30 seconds of continuous variable
- Power:
AC100V 50/60Hz 27VA
DC12V output switching mode AC adapter included
- Safety protection circuitry:
Built at the red shorts and cutoff type 3 LED lights (power OFF in back)
- Dimensions:
Unit 110 × 46 × 140mm (excluding protrusions)
- Weight:
Approximately 320g body

※ The appearance and specifications may be some changes.


Item Size/Weight : 29.3 x 11.5 x 6.2 cm / 505g

Product Specifications

Item series

Control Systems

Item code

CS-021A

JAN code

4582330650019

Purchase Information