Product Description

- This product is a kit for feeder of the adjacent line (straight line) and the adjacent line (curve), it is a 3-line input.

[Products]
- The heyday of the steam locomotive, the major stations are features the engine depot, there was always a turntable (turntable).
Steam locomotive that structure on the direction of travel is limited, in order to change the direction of travel in the middle of the station and terminus, change was loaded is in the direction to the turntable, equipped with water, such as sand slip to coal, the development In response to it I went starting to the next train traction.
Good old days, the steam locomotive is perfect to reproduce the district authority landscape of time was Hana railway is the electric turntable. The type which has a relatively shallow pit called a lower path expressions to the prototype, in the rotation and reliable stopping mechanism to smooth left and right, The item will doubles the fun to run a steam locomotive train. Of course it is dominating steam locomotive in the country equipped with a main girder of 160mm which can be mounted in the room. Such as the extension line set and adjacent lines form around the turn table, rich or do not try to reproduce the district authority landscape at hand in the item.

[Product Features Description
(1) and vehicle placement of the line connected to the turntable, feeder kit to be used at all times for the energization by the DCC.
(2) by attaching to the back side of the adjacent lines, make the power supply to each line. ON / OFF at the feed switch (sold separately) in the case of vehicle detention.
(3) Product description: collector pin (left and right), back cover Sarah screw feeder code each set of 3



Item Size/Weight : 15.3 x 4.3 x 2.5 cm / 39g

Product Specifications

Item series

Track

Item code

20-284

JAN code

4949727661827

Purchase Information