Product Description
- In addition we provide a jig holes for mounting the step immediately after the operation Sekitobira on the left side.
- The 103 series commuting shape and 111-based suburban train jig. Please kidnapping in 0.3mmφ drill when the magnitude of the hole of the first fixture in the use of the jig is small.
- Please do not open a hole in the never drill using this directly also because only this mark a push pin and Scriber. I will probably shift.
- Vehicle is 101 and 103 systems in the case of the step immediately after the crew door, If you one of 170mm so 150 minutes to 111 based copolymer and will be 1.13mm but apparent if ask have a center-to-center spacing of 1.2 ~ 1.3mm from the width of the door of the model is good seems.
- Please open the point was scribed in 0.3mmφ drill bit. The Company K, T, Inc., please adjust the position of some hole thickness of the gutter is the top different for by the G Corporation.
- Image is an example that is attached to GM's Kumoha 103. Please rest assured that the outline also to those who use the conventional product does not change even dimensional.
- Nickel silver etching
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Please note that pre-orders for this item could be cancelled due to supply shortages.
Item Size/Weight : 8.2 x 5 x 0.1 cm / 2g
Product Specifications
- Item code
- PX-445A
Purchase Information
This item is limited to 12 per household.