Product Description
- New release HO various institutions cab back parts for the car! ! Locomotive back part of your popularity in N gauge new appearance for the HO. Indoor cab back parts to further realize manner reproduce the brave figure will be released new.
- Installation is easy and safe. You can reproduce the back equipment as seen from the front and just stick to the light-shielding parts.
- Parts will have been cut by a laser, it is likely to stick. Please utilize all means your existing grade-up of the vehicle.
- Contents: EF65 cab rear-chair parts
- Was stuck Tsukekata:
(1) Remove the cab of the parts by removing the exceeding of each locomotive.
(2) seal and peel off carefully, and stick it on the part surface.
(3) it will return the beam finished the parts to the original position. So we have to make divided at the 1-position side and the second place side, please be careful in mounting. (The shorter of the roof monitor is the first place side)
(4) This is a complete re-assembled to restore.
※ When installing, please to assist with the adhesive is weak as did After instant adhesive or the like.
- Use Material: resin adhesive sheet
※ We have produced a vehicle to reference but there is a part that is different from the actual vehicle.
※ damage such responsibility at the time of processing is I can not assume. Please note.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 12.4 x 7 x 0.2 cm / 3g
Product Specifications
- Item code
- 10183
- JAN code
- 4582342841832
Purchase Information
This item is limited to 50 per household.