- 211-based 5000 series are the main changes in the minor vehicle of basic series that appeared in 1988, it expanded the top and bottom dimensions of the through-door passenger seat window the front as well as 213 system, installed outside the vehicle speaker to the side, cooler It will include points such as centralized AU75G cooler 1 groups two equipped with an inverter cooler AU711 from the mounting of. It should be noted that the seat has become a long sheet so that it can cope with during rush hour.
- 2-car train (6000 series), three-car train, there is a 4-car train, 242 cars have been active in JR Tokai each line District. In recent years pantograph single arm of the, I will change, such as a protective plate in the skirt is attached is seen by the ATS-PT mounting.
- The renewal of the 211-based 5000 series on sale in the economy kit with finished product model.
- You can enjoy from the shortest two-car train up to 10-car train.
- Skirt the design has been changed, the product of the current specification, such as single-arm pantograph.
- JR Tokai Approved
[Product Features]
- Car number printed, parts installed already finished product
- I bought in In response to customer needs and that want to immediately run, we have the car number printed, with another body part attached already.
- Type, destination stickers included
- For anyone who wants to decide the destination on your own, destination direction curtain and curtain type of front and side, the selection by the included sticker type.
- Correspond to the TN couplers (top section only)
- Also supports connection with TN coupler when performing the ligation at the top car to each other.
[Product specifications]
- Headlights (standard equipment): yellow LED
- Tail light (standard equipment): red LED
- Trolley (standard): coreless motor power unit with a new flywheel
- Power unit (standard equipment): coreless motor power unit with a new flywheel
- Swing drawbar: accessories
- TN coupler: Some correspondence
- Pantograph (standard equipment): repair, replacement parts: PT71D (No.5810)
- Interior light (sold separately correspondence): sold separately column reference
- Stickers: accessories
- Car number (standard): car number printed
- Different aspects direction curtain part by the production of annual size is not a mold, it will be represented by the printing.
- Truck will be using the existing DT50.
- Use the swing drawbar or TN coupler included with the connecting between the top car. [Lit off switch (I except motor vehicle)
- Structure on motor vehicle light unit of product will not be able to be turned off.
- Under the floor equipment will use existing new A, B, and C.
- Reproduce the presence or absence of different aspects louver in Kumoha-Moha and Kuha Saha.
- Cooler will use the C-AU711 that was used in 119 systems.
- Antenna, sculpture of signal flare will be molded integral with the roof.
- Skirt will reproduce the skirt with ATS-PT protective plate.
- Through the hood of the first part will reproduce the parts that comes to in mounting by the user (adhesive).
[Necessary tool]
- Cutter (cut-out of stickers)
- Tweezers (at the time of sticker attached)
- Cutter mat (for work)
- Rubber-based adhesive (for parts mounting)
[More]
- The main material of product, body: ABS resin, Case: PP
( This is a machine translation. Please allow for possible misinterpretations in the text. )