[Vehicle Summary
- Is a vehicle which was active until the scrapping of 1951 from the opening of business in the past Miyazakikotsu railway line that had signed from Minami-Miyazaki Station to Utsumi Station.
- It is Arita railway Koppel Unit 1 and the same 8.5t machine.
- Sparks stop of unique chimney was using the link-type coupler by line situation Features.
- After scrapping is donated to the University of Miyazaki, after the University of relocation it has been exhibited preserved currently in the General Welfare Center in the traffic park of Miyazaki city.
[Vehicle Guide]
- The Coppell manufactured by small steam locomotive that was active until the scrapping of 1951 than during the opening in Miyazakikotsu railway section that the Utsumi Station had signed from Minami-Miyazaki Station Miyazaki Prefecture (Showa 37 elderly). Sparks stop of unique chimney was using the last to link type coupler by line situation Features. After scrapping is donated to the University of Miyazaki, after the University of relocation has been exhibited preserved currently in the General Welfare Center in the traffic park] of Miyazaki city.
- Such as etching steel grade up parts and active duty during the parts as accessories (black painted) white metal made boiler is attached.
- [Miyazakikotsu Corporation Railways] name and the handle mark use approved
[Products Guide]
- Product stops sparks Features specific chimney, we created buffer, over the exhaust pipe and run the board, etc. details connecting the boiler and the cylinder in the new mold.
- It also comes with painted etching parts and nickel silver etching made of grade-up parts and running properties up for white-made metal boiler / steam pipe / exhaust pipe / plastic made Kemurishitsu parts for active duty during reproduction.
- These components it is possible to finish the vehicle attractive at it is for people with a work force but to use.
[Product contents]
- Painted PVC (simple rod specification)
- Body length: 37.5mm (except couplers)
- Vehicle width: 18mm · body height: 25mm
- Body: Plastic
- Motor: 4.5V (operating voltage 1V ~ 4.5V)
[accessories]
1. coupler mounting selection formula
Arnold type coupler × 2
Drawbar hook × 2
2. active duty during the etching parts (painted) × 1
3. Grade Up Parts (nickel silver etching) × 1
4. White Metal boiler × 1
5. parts for boilers (plastic) × 1
6. White Metal steam pipe × 1 / exhaust pipe × 2
7. buffer (mounting selection formula) × 4
8. dummy knuckle × 1
9. drawbar × 1
10. plastic-made steam pipe (mounting type) × 1
[Grade Up Parts contents]
1. slide bar support plate × 2
2. whistle × 1
3. safety valve × 1
4. Kemurishitsu handle × 1 · 5. handrail × 4
6. vehicle number × 4
7. nameplate × 1
8. valve device rod (official side) × 1
9. valve device rod (unofficial side) × 1
10. reversal bar × 1
11 to 13. Piping components × each 1
14. smoke chamber hand Sri × 1
[Active duty during the etching parts matte black-painted]
1. sliding door open (left and right) × 1 each
2. sliding door closed (left and right) × 1 each
3. door (left and right) × 1 each
4. Madokiwaku (before and after) × 1 each
※ The image is a state that was fitted with a buffer and a drawbar hook.
※ W Metal / etching parts unpainted unassembled. The mounting is required work force. Tools, paints, adhesives please purchase separately.
※ [Miyazakikotsu Corporation Railways] name beauty logo use approved
- Age: 12 years of age or older (not suitable for young children)
( This is a machine translation. Please allow for possible misinterpretations in the text. )