Product Description
[JR KIHA 54 No. 500 fee skirt]
(1) using a nipper or cutter knife detach carefully the parts from the runner.
(2) After the coating and surface treatment, and then attached to the TN coupler as the accompanying drawings.
- On top of the mounting into the hole in the base part of the TN coupler, fixed with instant glue.
- Torso received removal both sides of the jumper plug.
- Attach the Sunopurou of product. (If tight shave lightly both ends.
- Corresponding coupler: JC0374
Usually installed before one step from the position ※
- Although this product has been subjected to a degreasing treatment at the time of inspection, the time of the painting with a neutral detergent, etc., from to remove the oil and powder and the like on the surface, on the underlying treatment with a primer or surfacer, please painted .
- If you want to bond this product is the instant adhesive is the best.
- This product is, the nature of the material, because the weak material to bending and impact, desorption of bending and repeat Please avoid.
- Material: acrylic (3D printer output)
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 8.5 x 5.2 x 0.5 cm / 1g
Product Specifications
- Item code
- 3D-009
- JAN code
- 4580423420099
Purchase Information
This item is limited to 50 per household.