Skirt (Compliant Products: The Railway Collection/Tight Lock TN Coupler) for Tobu Railway Series 8000 Renewaled Car (2 Pieces) (Model Train) - HobbySearch Model Train N Store

This item is limited to 50 per household.

[ Recommeded Items ]
- The Railway Collection Tobu Railway Series 8000 Renewaled Car Nostalgia Sage Cream Color (4-Car Set)
- The Railway Collection Tobu Railway Series 8000 Renewaled Car Formation 8175 Standard Set (Basic 4-Car Set)
- The Railway Collection Tobu Railway Series 8000 Renewaled Car Formation 8506 (2-Car Set)
- The Railway Collection Tobu Railway Series 8000 Two-tone Color (4-Car Set)
- The Railway Collection Tobu Railway Series 8000 Flying Tojo Go Revival Color (4-Car Set)
- The Railway Collection Tobu Railway Series 8000 8163 Formation Urban Park Line (6-Car Set)
- The Railway Collection Tobu Railway Series 8000 Formation 8577 Standard Revival Color (2-Car Set)
- The Railway Collection Tobu Railway Series 8000 Formation 8570 Kameido Line/Daishi Line (2-Car Set)

[ Optional Parts ]
- [ 0375 ] Fully Automatic Type TN Coupler (SP Gray 6pieces)

[Tobu 8000 system update car skirt]
(1) using a nipper or cutter knife detach carefully the parts from the runner.
(2) After the coating and surface treatment, and then attached to the TN coupler as the accompanying drawings.
- On top of the mounting into the hole in the base part of the TN coupler, fixed with instant glue.
- Torso received removal both sides of the jumper plug.
※ accompanying drawings is a non-jumper plug side.
※ attention to the handling of the delicate air hose.
- Corresponding coupler: JC0375

- Although this product has been subjected to a degreasing treatment at the time of inspection, the time of the painting with a neutral detergent, etc., from to remove the oil and powder and the like on the surface, on the underlying treatment with a primer or surfacer, please painted .
- If you want to bond this product is the instant adhesive is the best.
- This product is, the nature of the material, because the weak material to bending and impact, desorption of bending and repeat Please avoid.
- Material: acrylic (3D printer output)

Item Size/Weight : 8.5 x 5.2 x 0.5 cm / 1g