- Green Max Economy Kit Series (Unpainted Board Kit)
- Dolly, pantograph, power unit sold separately
[Commentary]
- In 1968 (Showa 43), the 6000 series, which was introduced with Japan 's first armature chopper control device, was mass - produced after manufacturing the three as the first prototype and further through the second trial production. The front is an asymmetric type that has never been seen before, and because the stairs were built inside the emergency door, it became a characteristic figure without a window in the door part, bringing a big revolution to the Japanese railway world. The customer window was downed from the 4th incremental car and the cooling was standard equipped from the 6th order type. The 6000 series was deployed in Chiyoda Line with 353 vehicles, the improved 7000 series on the Yurakucho line, and the 8000 series with significant changes in the front design are active in Hanzomon line respectively.
- The product can produce 4-car train of 6000 series 5th order type of air conditioner in one descending window, as well as select the front of 7000 series and 8000 series of appendix, and can also manufacture each type of additional vehicle is. The characteristic front surface is reproduced realistically by adopting the fitted glass.
[Optional item]
- Truck: No. 5028 FS 369 (formerly Hankyu Minden)
* 8000 series truck: No. 5022 SS type
- Pantograph: No. 5803 PT 42 N (former No. 80 - 3 PT 42)
- Power unit: No. 5517 FS 369 (formerly Hankyu Minden)
* 8000 series power unit: No. 5518 SS type
- Extension set: No. 420 - 1 intermediate car 2 sets
[Color guide]
- Body: (39) Aluminum Silver
- Roof: (35) Dark gray
- Stripe: (25) Green 15
※ 7000 Series Stripe: (23) Yellow A (formerly Seibu Yellow)
* 8000 series stripe: Mr. color (67) purple (purple)
- Rooftop Equipment: (14) Gray No. 9
- Cooler: (8) Silvery (gloss)
- Underfloor equipment: (9) Mouse color No. 1
- Tail light: Mr. color (47) clear red
- Surface protection: (40) clear coat (gloss) or (44) clear coat (half gloss)
[Tool guide]
- Adhesive (Plastic model and rubber type)
- Plastic model nipper
- cutter knife
- Drill (blade: φ0.8 mm, φ 1.0 mm, φ 1.2 mm, φ 1.5 mm)
※ For assembly use plastic model or rubber type adhesive.
[Specification change information (difference from old product)]
- Specification change version will be revised product contents.
- The sticker that came with the previous product is not included.
- Tokyo subway corporation licensed for commercialization
( This is a machine translation. Please allow for possible misinterpretations in the text. )