Product Description
- It corresponds to 30000 series, 40000 series.
- 4 pairs in.
[how to use]
(1) Cut the part carefully from the runner using a nipper or cutter knife.
(2) After the base treatment and painting, attach each part to the bogie as shown in the attached drawing.
- Processing of the first bogie frame: Cut the semicircular mold at the end of the bogie frame and open the mounting hole with a drill of Ø 0.6 mm.
* Use an instantaneous adhesive or rubber type adhesive as the adhesive.
- This product has been subjected to degreasing treatment at the time of inspection, please remove the oil and powder etc on the surface with a neutral detergent etc. at the time of painting, and then paint with the primer or the surfacer on the ground treatment .
- Adhesion of this product, instant adhesives are best.
- Because this product is a material vulnerable to bending and impact on the properties of the material, please avoid bending and repeated detachment.
- Material: Acrylic (3D printer output)
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 8.5 x 5 x 0.2 cm / 1g
Product Specifications
- Item code
- 3D-003
- JAN code
- 4580423420037
Purchase Information
This item is limited to 50 per household.