Product Description
- The density between consolidations will increase.
[how to use]
(1) Cut the part carefully from the runner using a nipper or cutter knife.
(2) After the base treatment and painting, attach each part to the car body as shown in the attached drawing.
- How to use the mounting jig: Place the jig on the corner of the car body and open the mounting hole with a drill of 0.5 mm in diameter.
※ If you fix the jig with a masking tape etc, the position becomes easy to determine.
- How to install: Insert the parts into the mounting hole and fix with instantaneous adhesive. (For car No. 10)
- For car No. 4: Attach directly to the bottom of IR antenna with instantaneous adhesive.
- This product has been subjected to degreasing treatment at the time of inspection, please remove the oil and powder etc on the surface with a neutral detergent etc. at the time of painting, and then paint with the primer or the surfacer on the ground treatment .
- Adhesion of this product, instant adhesives are best.
- Because this product is a material vulnerable to bending and impact on the properties of the material, please avoid bending and repeated detachment.
- Material: Acrylic (3D printer output)
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 11.7 x 7 x 1.7 cm / 12g
Product Specifications
- Item code
- 3D-039
- JAN code
- 4580423420396
Purchase Information
This item is limited to 50 per household.