- The 27th railroad collection is a major private rail vehicle series supporting Japan's growth!
- The 27th railroad collection is a major private rail vehicle series that supported Japan's growth!
- We will line up representative vehicles that have been active since the 1980s!
- Seibu 401 series
· It is a vehicle that was born with high performance of the 411 series of hanging drive.
· The fourth-order car featuring a refined appearance with high rain gut position is reproduced.
- Tobu 5050 series
- It is a vehicle that was born in combination with a new body made by diverting the 7800 series traveling equipment.
· Product reproduces the appearance of increased pantograph.
- Sotetsu 3010 series
- The old 3000 series equipment - It is a vehicle that was born by combining the body equivalent of 6000 series using the underframe (part).
· Replace the carriage of the control car that was diverted initially, and reproduce the figure wrapped with the new paint.
- Meitetsu 7300 series
- It is a vehicle that was born in combination with a new body made by diverting traveling equipment of an old model car.
· Equipment in the car was as good as panorama car and it gained popularity.
- Kintetsu 2400 series
· Osaka Line 's first 1 M high performance car was made in 1966, and in 2004 all the cars were scrapped.
[Information on power unit]
- TM-14 power unit 20 m class A 2
· Seibu 401 series
· Sotetsu 3010 series
· Meitetsu 7300 series
- TM-17 power unit 20 m class B 2
· Tobu 5050 series
- TM-12R power unit 19 m class A
· Meitetsu 7300 series
[Information on traveling parts set]
- Part set for iron kite run TT - 04R (wheel diameter 5.6 mm 2 for both parts: gray)
· Seibu 401 series
· Tobu 5050 series
· Sotetsu 3010 series
· Meitetsu 7300 series
· Kintetsu 2400 series
[Guide of Pantograph]
- <0230> Pantograph PS 16 P
· Seibu 401 series
· Sotetsu 3010 series
- <0258> Pantograph PT 4811 N
· Tobu 5050 series
- <0250> Pantograph PT-4212-S
· Meitetsu 7300 series
· Kintetsu 2400 series
※ By using the optional power unit and N gauge running parts, you can run as an N-gauge railroad model.
※ The bogie frame attached to the power unit is not used for iron core 27 bullets.
※ The bogie frame for motivation is enclosed in a car with 27 pieces of iron, with a pantograph.
* If you do not power up, or use a car that is not wearing a pantograph, please use [TT - 04R].
※ Please note that pantographs guide objects of approximate shape to TOMIX products and may differ from the actual shape.
( This is a machine translation. Please allow for possible misinterpretations in the text. )