-Set as a set of four Ise and Hyuga for the escort of Zuikaku in the 19th operation of Showa 19th.
-The product is 1/350 big scale.
-The product consists mainly of a left and right split type hull that can be finished as a full hull type.
[Ise]
-The Air Battleship Ise is a world-class ship that entered service in Taisho 6 as the first Ise-type battleship.
-In 1954, it was converted into an air battleship with the same type of ship Hyuga, and participated in the operation of Junichi No. 1 in October 1941.
-The planned aircraft was not installed, but the armament was greatly strengthened and had excellent anti-air combat capabilities.
-While participating as a troop in the Battle of Leyte, he demonstrated high air defense capabilities and returned unharmed by shooting down numerous American aircraft and avoiding bombs with excellent steering techniques.
-31 types of 89-type 25mm3 machine guns, 11 96-type 25mm single-machine guns on the aviation deck, bridge windows, search lights, etc. 1153 parts (plastic products only).
-Comet ship Explosion Type 33 and Mizukami Mizumo (machine to be installed) are molded clear parts.
[Hyuga]
-Air battleship Hyuga is the second ship of [Ise type] built after the modern battleship [Fuso type] and was built at Mitsubishi Nagasaki Shipyard in Taisho 7th year.
-Refurbished once before the opening of the Pacific War, and in order to compensate for the turret explosion in 1954 and the loss of air power in the Midway Battle, the 5th and 6th turrets were removed along with Ise at the time of restoration, and the onboard operation was started. A refurbishment was carried out with possible aero decks.
-In the final battle between Japan and the United States, Operation No. 1 escorted the task force centered on Zuikaku.
-After that, in July 1945, the history was closed by wrecking and landing after an air raid outside Kure Port.
-Wind shield: A large wind shield is installed on the battle bridge, which is reproduced with dedicated parts.
-Main artillery command post: The shape near the top of the bridge is different from Ise, and is reproduced with special parts.
-Lookout: The lookout in the center of the bridge is reproduced with dedicated parts because the shape and height are different from Ise.
-Near the cannon: Sponson equipped with a cannon has a long shape behind Ise, and the strut below has a different shape. Represents the truss shape behind the base of the gun.
-On-board rack: Comes with special parts for the platform to load comets on the aircraft deck for work and ship mounting.
-Main turret canopy: The canopy armor plate, which is also the distinguishing point from Ise, is reproduced with four dedicated parts.
-Upper lookout deck: The Sponson shape near the three-armed machine gun is different from Ise, so it is reproduced with special parts.
-Chimney side gun turret and rear bridge gun turret: The triple gun turret on the side of the chimney and rear bridge has a different shape from Ise, so it is reproduced with dedicated parts.
-Rear mast: The shape difference of the rear mast and cross tree, which is also the distinguishing point with Ise, is reproduced with dedicated parts.
-Ship-borne aircraft: Along with Hyuga, who became the comet's mother ship in May 1944, the 11 / 12-type remodeled aircraft was reproduced with special parts. 5 machines are included.
[About Ise / Hyuga]
-Four sets of 45 caliber 35.6cm main guns 4 (upper and lower barrels, turret rotation)
-8 12.7cm high-angle guns (movable)
-6 jet guns, 2 injection machines (catapults), rangefinder
-No. 2 type 1 electric probe swivel movable, metal chain (anchor chain)
-Total length: about 615mm (bottom)
-Full width: about 90mm (ship bottom)
-Box painting: Takayuki Yoshiyuki
-31 types of 89-type 25mm3 machine guns (Ise)
-11 craft 25mm single-machine guns on the aircraft deck (Ise)
-Funabashi window
-Searchlight
-Bomber Comet Type 33
-Clear water (ISE)
-Total number of parts: 1153 parts (plastic products only) (Ise)
( This is a machine translation. Please allow for possible misinterpretations in the text. )