Product Description

-Real points can be switched in the dream slow action!

-It is a kit that anyone can control the servomotor easily by setting a dedicated controller.
-Four servomotors can be controlled individually with one controller.
-The operating range and operating speed of the servomotor can be easily controlled. (Operating range is up to 180 °)
-The power supply supports DC 9 to 25 V, the DCC line power supply supports up to 25 V, and an AC output adapter can not be used.

※ A separate power supply is required You can use KATO's AC adapter for 22-082 N as a power supply, but it requires small processing of the connection terminal.

-Control by DCC is also possible. (A separate stationery decoder is required.)
-Depending on the device, various scenes can be produced, such as moving the arm of a arm-type signal device or opening and closing the door of an engine storage other than the point.

[Item content]
Smart switch control board × 1
· Servo programming board × 1
· Servo motor × 4
· Servo motor fixing bracket x 4
· Servo horn (3 types) × 4
· Toggle switch × 4
・ Flat head screw + nut × 4
· Extension cord for brown, red and yellow servomotors × 4
・ Wooden screw L = 10 mm × 8 for bracket fixing for servo motor
・ Wooden screw L = 15 mm × 8 for securing each board
・ Φ0.6 mm piano wire × 4


Item Size/Weight : 15 x 10.5 x 5 cm / 315g

Product Specifications

Item series

Control Systems

Item code

PECO-PLS100

JAN code

5050881082805

Purchase Information