GY Tire Logo Decal (Decal) - HobbySearch Model Car Kit Store

This item is limited to 3 per household.

-Unbreakable decal
-Wheels can be fitted after applying tire decals.

[How to put decals]
-Separate only the amount of tire decal used.
-Remove the transparent protective sheet on the decal printing surface.
-Avoid touching the printed surface as much as possible.
-Remove the backing paper on the back of the decal printing surface, leaving only thin paper decals.
-Align the print surface with the glue on the tire to be pasted. 5. Once the position to be pasted is determined, lightly press and crimp with your fingers.
-Prepare water and let the decal surface soak in water on a thin paper. Slightly more OK (so as not to sag) 7. If you soak the water, the thin paper becomes transparent and the tire logo is clearly visible.
-After soaking the water, leave it for 40 seconds to 1 minute. Remove the thin paper slowly with tweezers. accomplished.
* You can put the decal on the tire before fitting the wheel first, and then fit the wheel.
* In the unlikely event of failure, the decal printing surface can be removed cleanly using a diluted solution.

Item Size/Weight : 14 x 7 x 0.2 cm / 5g