Product Description

This is a special set inspired by the Miyazaki Kotsu Railway Department of the 1950s.
The Koppel No. 4 is reproduced as a 3D printed assembly kit (T car, one piece, made by Thoma Model Works). A newly designed single-axle power unit is incorporated into the covered car Wa105.
Enjoy the formation with the two-axle passenger cars FuHa 4 and 5 (late model, steel plate specification) and the covered brake van WaFu 102.

[Koppel No. 4 T-car (3D printed assembly kit, wheel diameter 5mm)]
- Product Contents
3D Printed Assembly Kit
Made by Thoma Model Works
Body length: Approx. 30mm (excluding drawbar)
Body width: approx. 16mm
Vehicle height: approx. 24mm (including chimney)
Wheel diameter: 5mm
- accessories
1. Connecting drawbar
2. Pre-assembled 5mm wheels (with wheel core)
3. Screws
- Features
Body and rod are 3D printed as one unit
Trailer vehicle (non-powered)
Can be propelled by Wa105 (with single-shaft power)

[Wa105 Covered Wagon (1-Axle Powered/Uray Type)]
- Product Contents
Painted finished product (some parts installed)
Body length: approx. 39mm
(Excluding drawbar hook)
Body width: approx. 17mm
Vehicle height: approx. 22mm
Wheel diameter: 5.6mm
Body: Plastic
- accessories
1. Drawbar hook x 2
2. Drawbar x 2
- Power unit
Single shaft power unit

[Wooden 2-axle passenger car Fuha 4.5 (late model, steel plate specification)]
- Product Contents
Painted, finished product (some parts attached) 2-car set
Body length: Approx. 43.5mm (excluding coupler)
Body width: approx. 17mm
Vehicle height: approx. 21.5mm
Wheel diameter: 5.6mm
Body: Plastic
- accessories
1. Arnold Coupler
2.Drawbar hook
3. Drawbar
4. Dummy Knuckle
5. Buffer
6. Original coupler
7. Ventilator parts

[Waf 102 Brake Van (original model, body color: black)]
- Product Contents
Painted finished product (some parts installed)
Body length: Approx. 40mm (excluding coupler)
Body width: approx. 17mm Body height: approx. 22mm
Wheel diameter: 5.6mm Body: Plastic
- accessories
1. Arnold Coupler Drawbar Hook
2. Dummy Knuckle
3. Drawbar

*Some parts included with each vehicle require installation.
*Each image shows the parts installed.
*The above formation is for illustrative purposes only. It is not the actual formation.
*Due to the manufacturing characteristics of Coppel, there may be layering marks and deformation due to aging.
*The specifications and contents of each vehicle are subject to change.

Product Specifications

Item series

Pre-Colored Completed , Unassembled Kit

Organization

Miyazaki Kotsu (Miyakoh)

Region

Kyushu

Item code

91013

JAN code

4957265910130

Purchase Information