Product Description

--Reproduced in 1/80 scale, the EF62 type from the JNR era, which was used for direct access to Usui Pass

[Actual vehicle introduction]
The EF62 electric locomotive was introduced in 1963 as the main engine for direct service through the Usui Pass on the Shinetsu Main Line, and was coupled with the EF63 electric locomotive on the pass section.
- The second model has a roof-mounted lightning arrester located in the center of the car body, and side louvers with finer mesh.

[Product Features]
・1/80 scale 16.5mm gauge model
- The second-generation model with fine-meshed side louvers is reproduced on a vehicle that belonged to the Shinonoi Locomotive Depot during the JNR era.
・The roof monitor and handrail under the front window, characteristic of the Shinonoi Ward vehicle, are blue, and the whistle is raised.
- Car number is selectable and includes a metal transfer sheet
- Simple license plate included
・Headlights are lit with incandescent LEDs
- Equipped with a power terminal for maintenance inside the rooftop monitor
- Equipped with a motor with a flywheel
・The EF62's distinctive three-axle bogie has all three axles driven
- Minimum radius R600 can be passed (excluding S-shaped lines)

<Special Notes>
・Production of <HO-153> will be discontinued.

[Product contents]
EF62 (quadratic type)

[accessories]
- Runner parts: dolly step release lever, etc.
- Runner parts: Handrail (cream)
- Runner parts: Handrail (blue)
- Runner parts: Air hose
- Runner parts: Signal flare
- Runner parts: Whistle
- Runner parts: Electric heating indicator light
- Runner parts: Maker's plate
- Runner parts: Base for metal transfer sheet
- Runner parts: Wiper
- Runner parts: Hook A
- Runner parts: Hook B
- Parts: Jig
- Sticker: Ward name tag
- Transfer sheet (metal): for car numbers


Item Size/Weight : 32.3 x 13 x 7.2 cm / 744g

Product Specifications

Item series

Electric Locomotive

Organization

Japan National Railways (JNR)

Region

Chubu , Kanto

Item code

HO-2038

JAN code

4543736520382

Purchase Information