Product Description

[General-purpose Pitot tube set]
From repairing broken parts to repurposing them for other genres, the tapered steps enhance the realism of your creations!

[Product features]
This product is a brass turned part primarily designed to resemble the pitot tubes used in 1/48 to 1/72 scale air models.
By changing the thickness in the middle and adding a taper to the stepped section, it's easier to make and achieves a more realistic finish than making it yourself with brass wire.
This product is recommended not only for repairing broken kit parts, but also for those building aircraft models for which specialized parts are hard to find, and for those who want to try their hand at detailing their air models.
Furthermore, it can be widely used not only for air models but also for antennas on AFVs, ship models, and robot models.
The length is designed to accommodate various scenarios, so please cut both the front and back ends to your desired length.

[How to use]
1. Drill a hole in the hole where the Pitot tube will be inserted. For a total length of 20mm, use a diameter of 0.5mm; for a total length of 40mm, use a diameter of 0.9mm.
2. Cut the Pitot tube to adjust its length. (※Use wire cutters or similar tools suitable for metal wire.)
3. Secure it with super glue or similar adhesive.

*When cutting, please use wire cutters that are compatible with metal wires up to 1.0 mm in diameter. Cutting with wire cutters designed for plastic may cause damage to the blades.

Material: Brass
・Total length: 20mm (thin: 0.35mm thick: 0.5mm) 3 pieces
40mm (thin: 0.6mm thick: 0.9mm) 3 pieces
Total of 6 bottles




Item Size/Weight : 12.2 x 6.4 x 0.3 cm / 2g

Product Specifications

Item code

MA0011

JAN code

4573322754945

Purchase Information