Automatic Operation Unit for Tomix N-gauge trains.
Starts, accelerates, slows down and stops trains quite smoothly, with 9 modes of operation.
- Tomix N Gauge is a unit for automatic operation.
- TCS power, has become a device for automatic operation of Nekusutoneo.
- Departure time can stop smooth acceleration and deceleration.
- You can be the mode of operation 9.
※ This product is a power unit next series of neo-N, DC feeder in combination with N
- Product, without applying to the vehicle processing, TCS Power Unit N-1000-CL, TCS power
Unit N-1001-CL, and power unit in combination with N-1, the automatic operation of the vehicle
Can enjoy. Electric point from the operation of the rail trip straight to the simple N
A complex operation, to drive through the OFF function, the mode of a total of 10 patterns
Built, smooth stops, in addition to the departure time, stopping, acceleration and deceleration rates can change
Be. The N-point mode of operation using electric, turn off the automatic point
Will also change.
- Size: 134 × 94 × 55mm
- Cord Length: 39cm (DC output feeder N) / 37cm (TCS output)
- Output: DC 0.5A (0 ~ 12V for driving a vehicle / 12V TCS for)
- Current consumption: 85mA (through mode) / 45mA (Other Mode)
- The power of this product, please use the power unit to an optional N.
- Power Unit N, DC feeder N, sensor products are not included. If necessary, please purchase separately.
- To drive connected to a power unit of the product below, to become more complicated such as setting up speed and will not recommend.
· <5511> TCS Power Unit N-DU201-CL
· <5512> TCS Power Unit N-DU202-CL
· <5521> TCS Power & Sound Unit N-S2-CL
- <5503> Do not connect the power unit ES.
- <5506> TCS Power Unit N-1001-CL when used in connection with, may become unstable. Please note.
※ The more information, TOMIX please refer to the instruction manual and the accompanying catalog.
( This is a machine translation. Please allow for possible misinterpretations in the text. )