[About Vehicle]
- Production from 1963 was begun Soviet wheeled type armored reconnaissance vehicles is BRDM-2.
- The body has a bottom shaped design, equipped with a V-type eight-cylinder gasoline engine in the rear. Major feature of equipping the auxiliary wheels on one side two wheels that can be out as required to the vehicle body center side in addition to the four wheels.
- Auxiliary wheel driving force helped run at the time of an off-road ones that do not have. Also, it was the rear water jet sailing in propulsion also be attached to the in floating state in the water. Equipped with turning turret of the conical to the body top center. The turret was equipped with a 14.5mm heavy machine gun KPVT and 7.62mm machine gun PKT coaxial.
- Production number up to 1989 counted more than 20,000 cars, not only Soviet, Eastern European countries and Asia, deployed in countries such as Africa, I have been used.
[The model]
- After the war, Soviet development, armored reconnaissance vehicles Sowa-shiki that is operating around the world, the BRDM2 again
Current.
- The body is accurately reproduce the shape is divided into upper and lower. Lower body is integral parts of the bathtub type. In mounting and suspension front and rear axle and leaf spring on the vehicle body underside is finish with three-dimensional effect. Tire tread pattern also been reproduced, I tightens the foot.
- Of course, it features some auxiliary wheel is also modeled, guests can make interesting. In addition, the rear panel is a separate part. Detail of the jet hole of the water jet at the time of water navigation has also been expressed in the atmosphere a lot.
- Upper body is reproduced in one body part. Rear of the engine deck top mechanical finish delicate sculpture representation. Two armored hatch of the vehicle front window can be assembled by selecting the opening and closing. Accurately model the design of turning turret also cone-shaped to be mounted on the vehicle body upper part. 14.5mm heavy machine gun and a 7.62mm machine gun barrel also Sharp.
- Such as automotive tools and headlight parts, are firmly reproduced in another part, it will add the accent to finish.
- It is not even essential to the modern scene production, Stryker armored vehicle is a kit that does not miss the military fan.
[Main Features]
- The body is accurately reproduce the shape is divided vertically
- Lower body bathtub type of integral parts
- Rear panel is a separate part of
- Install the suspension, such as the front and rear axle and leaf spring on the vehicle body underside stand
Experience a finish
- Features some auxiliary wheel also modeled
- Tire tread pattern reproducibility
- Details of the jet hole of the water jet at the time of water navigation also expressed in full of atmosphere
- Eyes upper body engine deck top of the rear is reproduced in one body part delicate sculpture representation
Kanikaru finish
- Two armored hatch of the vehicle front window can be assembled by selecting the opening and closing
- 14.5mm also barrel of heavy machine gun and a 7.62mm machine gun Sharp
- Accurately model the turning turret also design of the cone-shaped to be mounted on the vehicle body top
- Such as automotive tools and headlight parts, reproduced in different parts
( This is a machine translation. Please allow for possible misinterpretations in the text. )