This item is limited to 50 per household.
- Wide curve Kant introduction rail of 22.5 ° width 37mm 391mm radius curve angle.
- Painted the sleepers and ballast, look very beautiful.
- Cant rail rail outside of the curve is higher than the inner,
It is a rail to be introduced into the cant rail with the Kant gradually from flat without Kant.
- Kant inclination angle changes gradually about 0-4 °, a curve angle 22.5 °.
- You can combine snap in nail, rail connection to each other is easy and guaranteed.
- There is a connection-compatible with traditional TOMIX rail.
- It supports single wire piers sold separately. Others, fence, railing, side walls
Can be mounted to the side rail. It supports various types of overhead line pole mount.
- Can be used as a double track rail by connecting to the inside of selling CR (L) a 354-22.5-WP.
- The wide rail cant portion for coupling when used as a double track rail
And (wide rail slab rail coupling to flat introductory part)
It corresponds to the double track pier effect if mounted on the underside.
- The attached to the lower surface of the wide rail slab rail feeder and power.
(Can be attached slab rail feeder. Feeder conventional impossible of installation)
- Is not supported yet on the structure for mounting the sensor type.
- This is a two pair of CL that Kant gradually sloping while curve to the left and CR to Kant gradually sloping while curve to the right.
( This is a machine translation. Please allow for possible misinterpretations in the text. )