★ The dreamy MY layout is finally reached!
Subterain, easy layout production OK.
Besides, it is short time, light weight, and you can start over again.
This useful layout material, for the first time!
- Subterain makes it easy to make a gradient!
- Ink line set
In the shape that the ink line and riser are combined,
It is most suitable for HO gauge when height of 10 cm or more is required.
- The height at which the crossover is possible, considering the height of the track bed and pantograph,
At least 5 cm for N gauge and minimum 10 cm for HO gauge are required.
- Example of using ink line starter
As an example, when creating a 3% gradient three-dimensional intersection with N gauge, add 3% ink line,
I will use three 3/4 inch risers, two ascending and descending. When purchasing,
One of the lowest (ST 1415) 3% gradient ink line enters one, (ST 1414) 3/4 inch riser
I need two pieces of 4 bottles.
- Specification
· Length: 61.0 cm
· Height (highest): 101.6 cm
Width: 6.3 cm
· Contents: 6 pairs· Contents: 4 parts
Combined total length: 243.8 cm
( This is a machine translation. Please allow for possible misinterpretations in the text. )