Product Description

[Fine Track and (fine track) ...]
- Pursuing realistic, ease of use!
- Superb system of is Tomix rail series has been developed as it is.
- You can also connect with the conventional Tomix rail.

[Products Guide]
- Wide straight rail that can be easily attached to and detached from one side of the ballast of length 140mm width 37mm.
- This product is convenient to the branch destination of the home of installation and line, is wide rail that can be detached on one side of the ballast part. Connection with the conventional Tomix rail is also possible.

[Characteristic]
- When you connect a wide-rail to the point branch destination, because the ballast between the branch inside strikes, to connect to our products that can be easily attached to and detached from one side of the ballast in such a place without the one side of the ballast.
- Corresponds to a point branching pattern of every wide rail in combination with the optional wide of ballast for the point of.
- In a state that does not put the one side of the ballast, it can be installed in the side of the station home.
- It is used as an ordinary wide rail I mean the one side of the ballast.
- Painted the ballast and sleepers, beautiful appearance.
- PC sleeper representation.
- Rail each other coupled with the snap with a nail, simple reliable connection.
- There is connection-compatible with conventional TOMIX rail.
- Fence sold separately, handrail, can be mounted to the side wall to the rail side.
- Wearing the single line pier base (optional) to the lower surface, corresponding to a single line pier.
- It can be used as a double track rail parallel to connecting two or more.
- It corresponds to the double-track elevated pier wearing the coupling for wide rail slab rail when used as a double track rail on the lower surface.
- Powered by mounting a feeder for wide rail slab rail on the lower surface (slab rail feeder also mounting Allowed, conventional feeder is mounted not).
- A sensor for wide rail slab rail can be installed by the user additional processing (sensor and one-touch mounting the sensor is mounted not for slab rail).
- Corresponding to various overhead power line pole mount.

[set content]
- Wide PC rail S140WP (F) (for point branch) × 4
- Widening ballast S140 (F) × 4

[accessories]
- Runner parts (wide rail joint (large × 2, small × 4)) × 4
- Runner parts (ballast joint × 5, hook × 5) × 2

[option]
- For Wide Rail wall: <3080>
- Single-wire bridge pier base for wide rail: <3090>
- Gap Joyner: <0111>



Item Size/Weight : 18.1 x 4.5 x 2.3 cm / 62g

Product Specifications

Item series

Track

Item code

1769

JAN code

4543736017691

Purchase Information