This item is limited to 24 per household.
[Product Features]
- Prototype: 115 system top car Kumoha 115, in Moha 114, and modeled the No. 300 bills that became with cooling from the time of manufacture. Sealed beam of the headlamp is that smaller diameter, modeled without leaving the original shape, such as unit sash of been Kyakumado.
- Head tail light case, because Taifon have a separate component (with spare), it is useful to masking of the front of the painted.
- Worked in the customer door part: is used when a semi-automatic door handle of winter [worked] is reproduced in sharp mold.
- Corresponding to the plurality's products diversion of: below is made KATO, TOMIX made of 113 system 1500,2000 series, none of the 115 system No. 1000 generation can be mounted.
- The body integrally molded: plastic integrally molded front, side, and Tsumaita. Cumbersome assembly, adhesion, adjustment unnecessary.
- Realize specific indicators: the front top of the type indicator, destination indicator of the side can reproduce so that there is a curtain in the back of the glass with a transparent parts.
- The cab glass without mold of wiper accessories: Convenient to another body of the wiper.
- Hole position for the signal flare: signal flare to be able to use the company's parts, established a blind hole showing a mounting position on the vehicle body back.
- Square distribution box which is installed in Tsumaita of Moha 114-300 are separate parts, bundled the two patterns of presence / absence of the piping.
- Eliminates the unnecessary parts included all, and set an inexpensive priced. And kit assembly and painting Introduction, perfect !! to mass increase Bei-remodeling-based
※ kit is only the vehicle body. Rooftop equipment, truck, floor equipment, flooring, such as room not included. Please prepare a third-party parts separately.
※ Since the cooler does not ship, α-model made AU75 cooler various (No.181 ~ 186) Please separately available, such as.
[Vehicle Description • 115 system No. 300 fee]
- 115 series 300 Bandai is suburban DC train on one side 3 door that has been produced from 1973. Is characterized by the cooling unit from the new manufacturing time is mounted, Kyakumado of the vehicle body side has a unit sash for labor saving in production and draft prevention and bettor hand Kyakutobira chipping also be downsized escape parts has become a no shape out of the car.
For the top car look like different left and right of the window arranged small window is provided in the motorman's side along with the driver's cabin area expansion, shutter headlamp front small diameter of sealed beam, Taifon of Taiyuki type I has been changed to month. Moha mounting the pantograph 114-300 is making it the same roof shape as other vehicles for now accommodate the route having a small section of the tunnel by a minimum working height is equipped with a low PS23 type pantograph.
Body color Tohoku line new made initially at the same painted and 115 system 0th generation in Shonan color and Yokosuka color, Takasaki, but has been operated in such Chuotosen, part of the vehicle Okayama, Hiroshima, Shimonoseki We are active permanent change of station, etc..
Operation form the basic organization eight cars + accessories organized four-car, organization, including the Kumoha 115 had been 併結 with 115 system 0th generation in operation, such as a minimum three-car.
Then 115 system, seat pitch expansion, 1000 Bandai and with enhanced cold snow, No. 2000 bill that you omit the cold snow, 2600 No. fee, is Bei increase over a long period of time, such as 3000 fee of 2 door conversion cross sheet vehicles, extensive in it has been operational.
[Product Description • Kumoha 115-300, Moha 114-300]
- This product is what you have modeled the new manufacturing has been No. 300 generation cars from 1972 among which it has been prepared as a 115 system.
Unit and sash of been the side Kyakumado, worked for small customers door portion, the small diameter of the sealed beam headlamp, pushing form aerator of bladed, electric destination direction curtain side, AU75 new-made air-conditioned car, such as intensive-shaped cooler equipment of the features and different parts of, I have been reproduced in precise mold.
From a minimum of three-car train up to 10-car train, please enjoy the variation of various organization.
[About this product]
- This product is a body kit. Floorboards, floor equipment, indoor, such as truck not included. Sorry to trouble you, please have the parts of these products separately.
- Recommended: below of KATO-made, as well as TOMIX made of 113 series, 115 series (both seat pitch expanding car).
※ However, it does not correspond to the initial product made TOMIX.
- Ventilation unit, cooler, rooftop equipment such as pantograph is not included.
- Recommended: α-model made other companies AU75 type cooler
※ Other recommended products, refer to the assembly instructions.
- Age: 10 years of age or older.
※ prefabricated plastic model of, and is better that there is work and knowledge of the model railroad is a product of interest.
( This is a machine translation. Please allow for possible misinterpretations in the text. )