Product Description
- New release HO various institutions cab back parts for the car! ! Locomotive back part of your popularity in N gauge new appearance for the HO. Indoor cab back parts to further realize manner reproduce the brave figure will be released new.
- Installation is easy and safe. You can reproduce the back equipment as seen from the front and just stick to the light-shielding parts.
- SG room of DD51 assembled easily. It is a structure of only stick to the surface assembly painting unnecessary paper-made wall.
- Parts will have been cut by a laser, it is likely to stick. Please utilize all means your existing grade-up of the vehicle.
- Contents: DD51 SG room part 1 輛分
- SG chamber assembly way:
(1) it will disconnect the white paper of a part. Photo 1 folding as (description see manual), and in the form of a b Insert the c parts.
(2) After the c parts fixed with instant adhesive, etc., disconnect the side of the ear of c, it is attached to the surface what was printed the SG. (See Photo 2-manual)
(3) green parts, and paste it to peel off the window portion as shown in the photo above 3 (see instructions) wound on the surface of a part.
(4) Remove the DD51 cab parts of the product, pasting and so on Photo 4 (see instructions).
(5) it is completed Once assembled to restore (see photo 5-manual).
※ Note: In the case of DCC, etc. installed already, there are times when it may interfere. Please go at your own judgment processing or the like.
※ If the lower portion of the side is in the air tank is SG side.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 12.4 x 7 x 0.5 cm / 4g
Product Specifications
- Item code
- 10181
- JAN code
- 4582342841818
Purchase Information
This item is limited to 50 per household.