Product Description
- Iron Collet for Odakyu 8000 type
- 2 pieces
- TN coupler compatible. Odakyu fans also agree with Colle!
[how to use]
(1) Cut the part carefully from the runner using a nipper or cutter knife.
(2) After the base treatment and painting, attach it to the TN coupler as shown in the attached drawing.
- Adhesive to the back of the TN coupler with instant adhesive.
※ The orientation of the skirt is different for Shinjuku and Odawara people.
- Corresponding coupler: JC25 or JC 6332
- This product has been subjected to degreasing treatment at the time of inspection, please remove the oil and powder etc on the surface with a neutral detergent etc. at the time of painting, and then paint with the primer or the surfacer on the ground treatment .
- Adhesion of this product, instant adhesives are best.
- Because this product is a weak material for bending and impact due to the nature of the material, please avoid bending and repeated attachment / detachment.
- Material: Acrylic (3D printer output)
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 11.8 x 7 x 1.5 cm / 13g
Product Specifications
- Item code
- 3D-015
- JAN code
- 4580423420150
Purchase Information
* Hurry! This item is almost sold out!
This item is limited to 2 per household.