This item is limited to 3 per household.
- The strongest antitank car self-propelled gun nurse horn developed by the German army during World War II!
- On 1/35 scale, new appearance with 4 in 1 kit that can be assembled by selecting from 4 types !!
[About actual vehicle]
- In the Second World War, the German army developed and deployed numerous self-propelled guns.
- Among them, I used the III / IV car base developed as a self-propelled gun dedicated chassis, and it was made of a combination of 8.8 cm guns that showed power in the fight against the battle even in the North Africa front etc. There Sd. It is Kfz.164.
- Originally called as hornice which means wasp horn, after that in January 1944 it was changed again to nurse horn meaning rhino.
- Development began in 1942 and the first schedule was planned to be equipped with a diameter of 8.8 cm anti-tank gun PaK43, but the development was delayed, as a main gun of PaK 43/1, which was retrofitted anti-tank gun PaK 43/41 for in-vehicle use powered by.
- The chassis was extended and the engine was mounted on the center of the car body, which was a chassis combining the car body and parts of type III J type and IV type F type.
- When the prototype car was completed in 1943, 494 were produced and deployed by March 1945. Also, a command car type equipped with a large communication machine is also being produced.
- The power of the 8.8 cm cannon was exactly the vehicle that was suitable for calling the strongest antitank self-propelled gun.
[About the model]
- The model is a plastic model assembly kit that reproduced Sd.Kfz.164, the strongest antitank self-propelled gun developed by the German Army of World War II on 1/35 scale.
- This kit is a 4-in-1 kit of contents that can be assembled by selecting the earliest type and its improved type, even the initial type and the command car type.
- Mechanical and powerful style equipped with open top battle room, long gun barrel 8.8 cm gun on III / IV car stand adequately attractive.
- The lower part of the chassis is reproduced stereoscopically with the slide mold and the details of the side is also assured.
- The shapes of the guide wheels are accurately reproduced on the road wheels, mobile wheels.
- Adopt familiar magic tracks for crawler tracks. We will tighten the finish of the chassis.
- In addition, exhaust pipes at the rear of the car body are preparing parts to firmly express the difference by each type.
- Open top combat rooms are modeled in detail, including base mechanisms such as main gun barrels, shelters and closures, and shell shells with preliminary rounds set.
- For the command car type, large communication equipment and communication equipment racks, antennas and antenna holders are prepared to produce distinctive finish.
- Not only the detail of the armor board surrounding the fighting room, but also the edge of the parts is sharp finish.
- As well as the thickness of the gun shield and similarly it is enhancing the feeling with delicate reproduction.
- Nurse horn kit that can be chosen from a wide range is an interesting one item of differences in detail.
[Major features]
- The strongest antitank self-propelled gun developed by the German army, Sd.Kfz.164 reproduced on 1/35 scale
- Initial type and its improved type, further content that can be assembled by selecting initial type and command car type 4in 1 kit
- Mechanical and powerful style equipped with open top battle room, long gun barrel 8.8 cm gun on III / IV car stand adequately attractive.
- The lower part of the chassis uses a slide mold to reproduce details of the side in three dimensions
- The shapes of the guide wheels are accurately reproduced on road wheels, mobile wheels
- Caterpillar adopts magic truck
- The exhaust pipe at the rear part of the car body is set to express firmly the difference by each type
- Open top combat rooms are modeled in detail, such as main gun barrels and gun mounts, closures, shells racks with spare bullets also set
- For command car type, large communication equipment and communication equipment rack, furthermore, antenna, antenna holder are prepared
- Delicate reproduction of the thickness of the gun shield etc.
- Finished product size: Total length of about 241 mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )