-Newly released room lights that can store electricity. The flicker can be reduced significantly.
-We will sell [C type (KATO product correspondence)] in three colors.
[Specification] (The specification as of the end of August 2018. There is also a case of specification change upon commercialization.)
-The light source strength can be switched with a switch on the board
-Mode 1: The light intensity is weakened considering the illuminance of the actual vehicle. Large storage capacity.
・ Mode 2: High illumination mode with brightness priority Small storage
* The initial setting is mode 1 setting.
-We support KATO vehicles, but there are some vehicles and models that can not be mounted.
-It can not be installed in the case of a tram or vehicle-only room light
- how to use
・ Please cut it to the length that can be attached to the vehicle. You can not use the room light of the person you cut off.
-There are three colors.
・ Blue-white: White room light
Yellowish white: middle color
· Bulb color: clear room light
※Note
-Please use this product at 12 V or less.
-As it is a room light for N gauge, usage other than this application is strictly prohibited.
-It is a function to suppress flicker. The function may not be able to be exhibited depending on the use environment.
※ About yellowish white
-It is a setting of the middle color of blue-white and bulb color. The color is suitable for vehicles that use UV windows.
- set content
・ One piece: One board, two current collectors
・ 7 pieces: 7 pieces of boards 14 pieces of current collectors
※ It carries 13 LEDs.
( This is a machine translation. Please allow for possible misinterpretations in the text. )