Product Description

-A wire for replacement of Styrofoam Hot Cutter is a nichrome wire used for replacing Styrofoam Hot Cutter (No. 24-386).
-Size: length 121 cm
-2 bottles

[How to use]
(1) Insert the replacement wire (Nichrome wire) through the hole of the connection ring of one rod of the Styrofoam hot cutter and screw the nichrome wire into place.
(2) Cut the nichrome wire with a nipper etc. with a suitable length that can be screwed to the connecting ring of the other rod.
However, when cutting the foam obliquely (evenly), fix the connecting rings of both rods at the position shifted up and down, and then cut. In that case, please be careful about the length of the nichrome wire.
(3) Thread the cut nichrome wire through the hole of the other connection ring, screw it down, and turn the connection ring so that the nichrome wire is tightened with a pin and fix the looseness.

※ This product is an appliance used for diorama policy, not a toy.
※ Target age 14 years old or older


Item Size/Weight : 11.4 x 7.7 x 0.3 cm / 5g

Product Specifications

Item code

24-387

JAN code

4949727675398

Purchase Information