[Features of effect products]
-Condensed with the texture of the actual car, such as shadows through the glass and dirt from aging.
-Superimposing the effect processing layer on the caption data used in our conventional products, the optimal finish for the model is reproduced.
-In the display with H rubber in the display window, the H rubber and the display window are integrated to eliminate the sense of incongruity due to the border between the two and the display content being overrun.
-No need to adjust the seal size, disassemble or modify the vehicle when applying.
-You can get a realistic expression just by cutting out carefully and leaving it in place.
-Since it is a different expression method from the past, you may have different preferences, but please give your vehicle a color.
* When pasting on a replacement display, it is necessary to scrape the print side of the replacement part. Please be careful as you will not be able to restore it to its original state.
[Attachment target]
-Display with H rubber expression (compatible with Tomytec products and Kato products) [*]
-Display without H rubber expression (special products for each manufacturer type are set)
* The thickness of H rubber is different for Tomytec products and Kato products, but the outer dimensions including H rubber are almost the same for both companies.
* Some models may have different external dimensions and aspect ratios from the actual vehicle, so it may need to be examined before use. (Example) Tomytec products: 183 series, 189 series / Kato products: Kiha 181, etc.
[others]
-The effect processing is superimposed on the data of our conventional product.
-Handle with care so as not to damage the printed surface as with conventional products.
-Although the overall impression is dark due to the effect processing, if you cut and paste it carefully without leaving any margins, it will fit into the vehicle without any discomfort.
-This product is basically transparent, but the effect depends on the amount of light applied. Also, the transparency effect cannot be obtained if the destination is printed in advance.
-It can also be used for formats with destinations printed in advance, but size adjustment is required for formats in which H rubber is engraved on the body side.
-Specifications / Number of sheets: Film sticker / 1 sheet
[Contents]
・ Akatsuki Kyoto
・ Akatsuki Shin-Osaka
・ Tsurugi Osaka
・ Tsurugi Niigata
・ Nana Shin-Osaka
・ Naha Osaka
・ Japan Sea Osaka
・ Japan Sea Aomori
(Each 26)
·Osaka
・ Izumo City
(24 each)
・ Akatsuki Nagasaki
・ Akatsuki Sasebo
・ Comet Oita
・ Comet Miyazaki
・ Comet Miyakonojo
・ Naha Kyoto
・ Nana Kumamoto
・ Nanaha Nishi Kagoshima
・ Japan Sea Hakodate
──
・ Spur Myoko Shiga
・ Spur Nihonkai Zao
(16 each)
・ Nana Osaka-Nishi Kagoshima
(2 each for left and right)
・ Nana Shin-Osaka-Kumamoto
* Reproduces amber color over time
(3 types each for left and right)
・ Legato seat display window closure
-Four
・ No display
-12
・ Twilight Express Osaka
・ Twilight Express Sapporo
──
-Forwarding <Gothic typeface>
・ Test run <Gothic typeface>
・ Temporary <Gothic typeface>
・ Group <Gothic typeface>
──
・ Twilight Express Osaka <Gothic typeface>
・ Twilight Express Sapporo <Gothic typeface>
・ Twilight Express Kyoto <Gothic typeface>
・ Twilight Express Shimonoseki <Gothic typeface>
・ Twilight Express Oita <Gothic typeface>
・ Twilight Express
・ Twilight Express Shin-Etsu Kobe <Gothic typeface>
・ Twilight Express Shinetsu Kurohime <Gothic typeface>
(16 each)
・ KAIMON Mojiko Okura-Mojiko
・ Kaimon Nishi Kagoshima Mojiko-Ogura normal
・ Nichinan Hakata Nishi Kagoshima-Miyazaki normal
・ Nichinan Nishi Kagoshima Normal between Miyazaki and Nishi Kagoshima
──
・ Kaimon Mojiko
・ Kaimon Nishi Kagoshima
・ Nichinan Mojiko Nishi Kagoshima-Miyazaki Normal <Typeface difference>
・ Nichinan Nishi Kagoshima Normal between Miyazaki and Nishi Kagoshima
(16 each)
・ Forward
・ Test run
・ Temporary
(4-6 each)
( This is a machine translation. Please allow for possible misinterpretations in the text. )